Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black DDR5 modules with white heatspreaders and RGB light bars

G.SKILL

G.SKILL F5-8400J4052G24GX2-TZ5RK 48GB (2×24GB) DDR5 8400 CL40 desktop RAM

SKU CH-5A5Z-8WEA3 MPN F5-8400J4052G24GX2-TZ5RK

Dual-channel 48 GB DDR5 kit running at 8400 MT/s with CL40 timings and RGB lighting

  • Capacity48GB (2 x 24GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 8400 (PC5 67200)
  • CAS LatencyCL40
  • Timing40-52-52-134
  • Voltage1.40V

Capacity 48GB (2 x 24GB)

Speed DDR5 8400 (PC5 67200)

CAS Latency CL40

Color Black

LED Color RGB

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • 48 GB dual-channel kit for high-capacity workloads
  • DDR5 8400 speed enables ultra-fast data transfer
  • CL40 40-52-52-134 timings tuned for low latency
  • 40 V operation supports stable overclocking headroom
  • Intel XMP 3.0 profile simplifies one-click performance setup

High-Speed DDR5 Kit for Enthusiasts

This 48GB dual-channel kit pairs two 24GB modules rated at DDR5 8400 with CL40 timings. It targets builders using 14th Gen Intel Core processors on 700 Series chipsets who want maximum bandwidth for gaming and heavy multitasking. The 1.40V operating voltage and XMP 3.0 profile deliver validated high-frequency stability out of the box.

Matched Pair with Aluminium Heatspreaders

The two modules are factory-matched to run together at 40-52-52-134 timings without manual tuning. Each stick carries a black brushed-aluminium strip set into a matte white body that dissipates heat from the ICs. Customisable RGB lighting runs along the top bar and synchronises with motherboard software. Mixing this kit with other memory is not supported.

Sustained Load Stability at 1.40V

Hand-screened DDR5 ICs maintain the rated 8400 MT/s transfer rate during extended sessions rather than only in short bursts. The 1.40V supply and dual-texture heatspreaders keep thermals controlled when all threads stay saturated. XMP 3.0 applies the 40-52-52-134 profile automatically so the bandwidth holds steady under continuous compute or rendering workloads.

Kohokohdat

  • 48 GB dual-channel kit for high-capacity workloads
  • DDR5 8400 speed enables ultra-fast data transfer
  • CL40 40-52-52-134 timings tuned for low latency
  • 40 V operation supports stable overclocking headroom
  • Intel XMP 3.0 profile simplifies one-click performance setup

Tekniset tiedot

BrandG.SKILL
SeriesTrident Z5 RGB Series
ModelF5-8400J4052G24GX2-TZ5RK
Capacity48GB (2 x 24GB)
Type288-Pin PC RAM
SpeedDDR5 8400 (PC5 67200)
CAS LatencyCL40
Timing40-52-52-134
Voltage1.40V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
FeaturesExtreme performance DDR5 memory designed for gaming and PC enthusiasts
Customizable RGB lighting support
Intel XMP 3.0 Support
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the rated XMP overclock s
Recommend UseIntel 700 Series Chipset; 14th Gen Intel Core Desktop Processors
LED ColorRGB
Lähetyspaino0.16 kg
Pakkauksen mitat159 × 133 × 19 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 1.40 V required for DDR5 8400 CL40 become the first limit under sustained load?

The kit is rated at 1.40 V for the 8400 MT/s speed with 40-52-52-134 timings; sustained operation stays at this voltage unless the platform pushes higher.

How much heat and noise should I expect from the aluminum heatspreader during all-day use?

The black brushed-aluminum heatspreader passively cools the hand-screened ICs; it adds no fan noise and runs warm but within DDR5 thermal limits.

Which motherboard feature must I already have to run this dual-channel kit at its rated speed?

An Intel 700-series chipset board with an XMP 3.0-capable BIOS is needed to load the 8400 MT/s profile automatically.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.