G.SKILL F5-6000J3238F16GX2-TZ5RK 32GB (2×16GB) DDR5 6000 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
Dual-channel 32 GB kit of DDR5 6400 memory with CL32 timings and 1.40 V operation, optimised for Intel 600-series platforms via XMP 3.0
Capacity 32GB (2 x 16GB)
Speed DDR5 6400 (PC5 51200)
Color Silver
LED Color None
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This Trident Z5 kit delivers 32GB of DDR5 memory in a matched 2×16GB dual-channel set. Rated at 6400 MT/s with CL32-39-39-102 timings at 1.40V, it is built for high-performance desktop builds.
Developed and validated on Intel 600-series platforms with XMP 3.0 profiles, the kit suits enthusiasts targeting that chipset generation. Builders on other DDR5 platforms or those needing ECC or registered modules should evaluate compatibility separately.
The single decisive specification is the Intel XMP 3.0 profile that sets 6400 MT/s at CL32 1.40V; if your motherboard and CPU support that profile the kit will run at its rated speed, otherwise manual tuning is required.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z5 Series |
| Model | F5-6400J3239G16GX2-TZ5S |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 6400 |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Silver |
| Heat Spreader | Yes |
| Features | Extreme performance DDR5 memory designed for PC enthusiasts Intel XMP 3.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will depend on the |
| Recommend Use | Intel 600 Series |
| LED Color | None |
| Lähetyspaino | 0.17 kg |
| Pakkauksen mitat | 160 × 137 × 15 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 1.40V rating applies when the Intel XMP 3.0 profile is active; the modules will start at the platform default voltage before XMP is applied.
Yes, the kit is a matched dual-channel pair validated for Intel 600 Series platforms with XMP 3.0 support.
They represent CAS latency, RAS-to-CAS delay, RAS precharge and cycle time at DDR5 6400; lower figures generally improve responsiveness in latency-sensitive workloads.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?