G.SKILL F5-6000J3238F16GX2-TZ5RS 32GB (2 x 16GB) DDR5 6000 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
32 GB dual-channel DDR5 kit running at 6000 MT/s with CL30 latency and 1.35 V for Intel XMP 3.0 platforms
Capacity 32GB (2 x 16GB)
Speed DDR5 6000 (PC5 48000)
LED Color RGB
This 32 GB kit contains two 16 GB modules rated for DDR5 6000 with a CAS latency of CL30. It targets enthusiasts and gamers who want high-frequency memory with tight timings on a modern Intel platform.
The kit runs at 1.35 V and uses Intel XMP 3.0 profiles for automatic configuration. Each module carries an aluminum heatspreader and addressable RGB lighting, leaving standard DIMM slots free for additional matched kits if the motherboard supports four slots.
Buyers running Intel 600 series chipsets gain a validated dual-channel solution with factory-matched ICs. Users on AMD platforms or older Intel chipsets should verify compatibility before purchasing, and those needing ECC or registered memory must choose a different product.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z5 RGB Series |
| Model | F5-6000J3040F16GX2-TZ5RK |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Extreme performance DDR5 memory designed for gaming and PC enthusiasts Customizable RGB lighting support Intel XMP 3.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock s |
| Recommend Use | Intel 600 Series |
| LED Color | RGB |
| Lähetyspaino | 0.17 kg |
| Pakkauksen mitat | 160 × 137 × 15 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit is rated CL30 at 6000 MT/s with 1.35 V using Intel XMP 3.0, so the primary timing stays at 30 when the profile is active.
The black brushed-aluminum heatspreader is designed to keep the hand-screened DDR5 ICs cool during extended high-speed use.
An Intel 600-series board with an XMP 3.0-capable BIOS is needed to enable the 6000 MT/s profile.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?