G.SKILL F5-6000J3238F16GX2-TZ5RS 32GB (2 x 16GB) DDR5 6000 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
G.SKILL
32 GB dual-channel DDR5 kit running at 6000 MT/s with CL30 latency and 1.35 V for Intel XMP 3.0 platforms
Capacity 32GB (2 x 16GB)
Speed DDR5 6000 (PC5 48000)
LED Color RGB
This 32 GB kit contains two 16 GB modules rated for DDR5 6000 with a CAS latency of CL30. It targets enthusiasts and gamers who want high-frequency memory with tight timings on a modern Intel platform.
The kit runs at 1.35 V and uses Intel XMP 3.0 profiles for automatic configuration. Each module carries an aluminum heatspreader and addressable RGB lighting, leaving standard DIMM slots free for additional matched kits if the motherboard supports four slots.
Buyers running Intel 600 series chipsets gain a validated dual-channel solution with factory-matched ICs. Users on AMD platforms or older Intel chipsets should verify compatibility before purchasing, and those needing ECC or registered memory must choose a different product.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z5 RGB Series |
| Model | F5-6000J3040F16GX2-TZ5RK |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Extreme performance DDR5 memory designed for gaming and PC enthusiasts Customizable RGB lighting support Intel XMP 3.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock s |
| Recommend Use | Intel 600 Series |
| LED Color | RGB |
| Težina pošiljke | 0.17 kg |
| Dimenzije pakiranja | 160 × 137 × 15 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The kit is rated CL30 at 6000 MT/s with 1.35 V using Intel XMP 3.0, so the primary timing stays at 30 when the profile is active.
The black brushed-aluminum heatspreader is designed to keep the hand-screened DDR5 ICs cool during extended high-speed use.
An Intel 600-series board with an XMP 3.0-capable BIOS is needed to enable the 6000 MT/s profile.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?