G.SKILL F5-6000J3238F16GX2-TZ5RS 32GB (2 x 16GB) DDR5 6000 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
32 GB dual-channel DDR5 kit running at 6000 MT/s with CL30 latency and 1.35 V for Intel XMP 3.0 platforms
Capacity 32GB (2 x 16GB)
Speed DDR5 6000 (PC5 48000)
LED Color RGB
This 32 GB kit contains two 16 GB modules rated for DDR5 6000 with a CAS latency of CL30. It targets enthusiasts and gamers who want high-frequency memory with tight timings on a modern Intel platform.
The kit runs at 1.35 V and uses Intel XMP 3.0 profiles for automatic configuration. Each module carries an aluminum heatspreader and addressable RGB lighting, leaving standard DIMM slots free for additional matched kits if the motherboard supports four slots.
Buyers running Intel 600 series chipsets gain a validated dual-channel solution with factory-matched ICs. Users on AMD platforms or older Intel chipsets should verify compatibility before purchasing, and those needing ECC or registered memory must choose a different product.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z5 RGB Series |
| Model | F5-6000J3040F16GX2-TZ5RK |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Extreme performance DDR5 memory designed for gaming and PC enthusiasts Customizable RGB lighting support Intel XMP 3.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock s |
| Recommend Use | Intel 600 Series |
| LED Color | RGB |
| Sūtījuma svars | 0.17 kg |
| Sūtījuma izmēri | 160 × 137 × 15 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The kit is rated CL30 at 6000 MT/s with 1.35 V using Intel XMP 3.0, so the primary timing stays at 30 when the profile is active.
The black brushed-aluminum heatspreader is designed to keep the hand-screened DDR5 ICs cool during extended high-speed use.
An Intel 600-series board with an XMP 3.0-capable BIOS is needed to enable the 6000 MT/s profile.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?