Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular black ATX power supply, fully modular, 120mm fan grille, 150mm deep

GIGABYTE

GIGABYTE GP-UD1000GM PG5 REV2.0 1000W power supply

SKU CH-TGEF-5EV28 MPN GP-UD1000GM PG5 REV2.0

Fully modular 1000 W ATX supply with a single +12 V rail, 80 Plus Gold efficiency and native 16-pin cable for PCIe 5.0 graphics cards

  • TypeATX12V
  • Maximum Power1000 W
  • Fans120mm Hydraulic Bearing (HYB)Fan
  • PFCActive PFC (>0.9 typical)
  • Main Connector20+4Pin
  • +12V RailsSingle
  • Delivers 1000W on a single +12V rail for stable high-load performance
  • 80 Plus Gold certification confirms 90% typical-load efficiency
  • Fully modular design with 16-pin native cable enables clean PCIe 5.0 GPU installs
  • Intel ATX 3.0 certified for 200% power excursion and 70% low-load efficiency
  • 120mm hydraulic bearing fan and Japanese capacitors rated for 100000 hours MTBF

1000W ATX 3.0 power supply

This fully modular unit delivers 1000 W from a single +12 V rail and meets the Intel ATX 3.0 design guide. It includes a native 16-pin connector rated for 600 W to support PCIe 5.0 graphics cards. Japanese capacitors and a 120 mm hydraulic bearing fan complete the build.

Suits high-end GPU builds; skip for modest systems

Builders pairing a modern 600 W-class graphics card with a powerful CPU will benefit from the 200 % total power excursion allowance and 70 % efficiency at low load. Systems targeting mid-range or entry-level GPUs do not need this headroom and can choose a lower-wattage unit.

1000 W capacity with 600 W GPU headroom

The single-rail design comfortably feeds a 600 W graphics card plus CPU and peripherals while staying within the 80 Plus Gold 90 % typical-load efficiency mark. Protection circuits cover over-voltage, over-power, short-circuit, under-voltage, over-current and over-temperature events. Beyond the rated 1000 W the unit reaches its limit.

Priekšrocības

  • Delivers 1000W on a single +12V rail for stable high-load performance
  • 80 Plus Gold certification confirms 90% typical-load efficiency
  • Fully modular design with 16-pin native cable enables clean PCIe 5.0 GPU installs
  • Intel ATX 3.0 certified for 200% power excursion and 70% low-load efficiency
  • 120mm hydraulic bearing fan and Japanese capacitors rated for 100000 hours MTBF

Specifikācijas

BrandGIGABYTE
ModelGP-UD1000GM PG5 REV2.0
TypeATX12V
Maximum Power1000 W
Fans120mm Hydraulic Bearing (HYB)Fan
PFCActive PFC (>0.9 typical)
Main Connector20+4Pin
+12V RailsSingle
PCI-Express Connector4 x 6+2-Pin
SATA Power Connector8
Max PSU Length150 mm
ModularFull Modular
Efficiency90% at typical load
Energy-Efficient80 PLUS GOLD Certified
ProtectionOVP/OPP/SCP/UVP/OCP/OTP
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current15A-6.5A
MTBF>100,000 Hours
ApprovalsBSMI/CE/CCC/FCC/TUV/RCM/CB/EAC/KCC/UL
ConnectorsATX/MB 20+4 Pin x 1
EPS/ATX 12V 4+4pin x 2
PCI-e 6+2 pin x 4
PCI-e 16 pin x 1
SATA 5 pin x 8
Peripheral 4-pin x 3
Floppy 4-pin x 1
Cable SpecBlack Flat Cables
Dimensions140 x 150 x 86mm
Sūtījuma svars2.86 kg
Sūtījuma izmēri259 × 207 × 119 mm

Jautājumi par šo preci

Do I need an ATX 3.0 compatible motherboard to use this 1000W unit?

No. The PSU follows the ATX12V form factor and includes a 20+4-pin main connector, so it works with standard ATX motherboards. The ATX 3.0 certification means it can handle 200% power excursions and 70% low-load efficiency, but it does not require a new board.

Will the four 6+2-pin PCIe connectors and the 16-pin cable power an older graphics card that only has 8-pin sockets?

Yes. Each 6+2-pin plug can be used as a straight 6-pin or an 8-pin connector, and the native 16-pin cable is only needed for PCIe 5.0 cards rated up to 600W. Older GPUs simply use the 6+2-pin leads.

How can I confirm the fan is running in its low-noise mode after I build the system?

The 120mm hydraulic-bearing fan spins at a reduced speed under light loads and ramps up as power draw increases. You can hear the change in acoustic level when the system moves from idle to a heavy workload, confirming the smart fan curve is active.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.