Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Grey rectangular ASIC miner with front grille and rear ports

Godminer

Godminer M30S 88TH 3344W ASIC mining hardware

SKU CH-54SP-FADMG

An ASIC miner delivering 88 TH/s at 3344 W with 38 J/TH efficiency, Ethernet connectivity and included PSU and cords

  • ColorGrey
  • 88 TH/s hash rate for high mining throughput
  • 38 J/TH power efficiency reduces electricity cost per terahash
  • 3344 W power draw matched with included PSU and cords
  • Ethernet connection for stable pool communication
  • Compact 390 x 155 x 240 mm frame fits dense rack layouts

Whatsminer M30S ASIC Miner

The Godminer M30S is an application-specific integrated circuit miner built for Bitcoin mining. It delivers a nominal hashrate of 88 TH/s while drawing 3344 W from the wall. The unit ships with an integrated power supply and the necessary power cords. It connects to the mining network through a wired Ethernet link.

88 TH/s Hashrate and 38 J/TH Efficiency

At the rated 88 TH/s the machine operates at an efficiency of 38 J/TH, giving operators a clear view of daily energy cost per terahash. The 3344 W power draw sets a firm ceiling on how many units a given electrical service can support. In practice the hashrate holds steady while the ambient temperature stays within the specified range of -5 °C to 35 °C.

P21D AC 200 V-277 V Power Input

The miner requires a P21D AC inlet fed by a 200 V to 277 V supply, with an IEC C19 cord rated at 16 A or higher. This high-voltage requirement means standard low-voltage circuits cannot power the device without additional infrastructure. The Ethernet interface remains the sole data path, so network planning must account for wired connectivity at each unit.

Priekšrocības

  • 88 TH/s hash rate for high mining throughput
  • 38 J/TH power efficiency reduces electricity cost per terahash
  • 3344 W power draw matched with included PSU and cords
  • Ethernet connection for stable pool communication
  • Compact 390 x 155 x 240 mm frame fits dense rack layouts

Specifikācijas

BrandGodminer
ModelM30S
ColorGrey

Jautājumi par šo preci

Will the M30S 88TH share a 200–277 V P21D circuit with my existing M20S units?

Both models accept the same P21D AC 200–277 V input, so they can run from identical PDU outlets; just ensure the circuit and IEC C19 cords are rated for the combined 16 A or higher load.

How do I confirm the M30S is delivering its rated 88 TH/s after installation?

Check the miner’s web dashboard or pool-side statistics for a sustained hashrate near 88 TH/s and a power draw close to 3344 W, which matches the 38 J/TH efficiency spec.

Does the box include the IEC C19 power cord and the PSU, or must I source them separately?

The package ships with the integrated PSU and IEC C19 power cords included, so no separate power-supply or cord purchase is required for standard 200–277 V operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.