Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Grey rectangular ASIC miner with front grille and rear ports

Godminer

Godminer M30S 88TH 3344W ASIC mining hardware

SKU CH-54SP-FADMG

An ASIC miner delivering 88 TH/s at 3344 W with 38 J/TH efficiency, Ethernet connectivity and included PSU and cords

  • ColorGrey
  • 88 TH/s hash rate for high mining throughput
  • 38 J/TH power efficiency reduces electricity cost per terahash
  • 3344 W power draw matched with included PSU and cords
  • Ethernet connection for stable pool communication
  • Compact 390 x 155 x 240 mm frame fits dense rack layouts

Whatsminer M30S ASIC Miner

The Godminer M30S is an application-specific integrated circuit miner built for Bitcoin mining. It delivers a nominal hashrate of 88 TH/s while drawing 3344 W from the wall. The unit ships with an integrated power supply and the necessary power cords. It connects to the mining network through a wired Ethernet link.

88 TH/s Hashrate and 38 J/TH Efficiency

At the rated 88 TH/s the machine operates at an efficiency of 38 J/TH, giving operators a clear view of daily energy cost per terahash. The 3344 W power draw sets a firm ceiling on how many units a given electrical service can support. In practice the hashrate holds steady while the ambient temperature stays within the specified range of -5 °C to 35 °C.

P21D AC 200 V-277 V Power Input

The miner requires a P21D AC inlet fed by a 200 V to 277 V supply, with an IEC C19 cord rated at 16 A or higher. This high-voltage requirement means standard low-voltage circuits cannot power the device without additional infrastructure. The Ethernet interface remains the sole data path, so network planning must account for wired connectivity at each unit.

Najważniejsze cechy

  • 88 TH/s hash rate for high mining throughput
  • 38 J/TH power efficiency reduces electricity cost per terahash
  • 3344 W power draw matched with included PSU and cords
  • Ethernet connection for stable pool communication
  • Compact 390 x 155 x 240 mm frame fits dense rack layouts

Specyfikacja

BrandGodminer
ModelM30S
ColorGrey

Pytania dotyczące tego produktu

Will the M30S 88TH share a 200–277 V P21D circuit with my existing M20S units?

Both models accept the same P21D AC 200–277 V input, so they can run from identical PDU outlets; just ensure the circuit and IEC C19 cords are rated for the combined 16 A or higher load.

How do I confirm the M30S is delivering its rated 88 TH/s after installation?

Check the miner’s web dashboard or pool-side statistics for a sustained hashrate near 88 TH/s and a power draw close to 3344 W, which matches the 38 J/TH efficiency spec.

Does the box include the IEC C19 power cord and the PSU, or must I source them separately?

The package ships with the integrated PSU and IEC C19 power cords included, so no separate power-supply or cord purchase is required for standard 200–277 V operation.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.