Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact white ASIC miner with dual 6-pin power ports and Wi-Fi antenna

Goldshell

Goldshell Mini Doge III 700 MH/s 400 W Wi-Fi Litecoin Dogecoin without PSU mining hardware

SKU CH-GQM0-DKTT9

Compact ASIC miner for Litecoin and Dogecoin delivering 700 MH/s at 400 W with a 550 MH/s low-power mode at 260 W, dual 6-pin power and Wi-Fi

  • 700 MH/s default hashrate for strong LTC and DOGE mining
  • 400 W default draw keeps electricity cost predictable
  • 550 MH/s low-power mode at 260 W cuts running expense
  • Wi-Fi connectivity simplifies network setup without cables
  • Dual 6-pin power inputs ensure stable delivery to the ASIC board

Goldshell Mini Doge III ASIC Miner

The Goldshell Mini Doge III is an ASIC miner built for Litecoin and Dogecoin mining. It targets hobbyist or small-scale operators who want a compact, Wi-Fi enabled unit without an included power supply. Buyers needing higher throughput or multi-algorithm flexibility will find this single-purpose device limiting.

Hashrate and Power Profiles

Default operation delivers 700 MH/s at 400 W, while a low-power mode runs at 550 MH/s and 260 W. Both figures carry a ±5 % tolerance. The unit has no additional performance tiers, so operators must choose between maximum output or reduced electricity draw.

Dual 6-Pin Power Requirement

The chassis uses two 6-pin connectors for power input and both must be fully seated before start-up; running on a single connector is not supported. Wireless networking is built in for remote management, eliminating the need for a wired Ethernet link in typical home or small-farm deployments.

Priekšrocības

  • 700 MH/s default hashrate for strong LTC and DOGE mining
  • 400 W default draw keeps electricity cost predictable
  • 550 MH/s low-power mode at 260 W cuts running expense
  • Wi-Fi connectivity simplifies network setup without cables
  • Dual 6-pin power inputs ensure stable delivery to the ASIC board

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Will the Goldshell Mini Doge III run on my existing 6-pin PSU cables?

The miner requires two 6-pin connectors fully seated; a single 6-pin cable is not sufficient and must not be used alone.

How can I verify the Goldshell Mini Doge III is hashing at the rated 700 MH/s after setup?

Check the dashboard for a reported hashrate near 700 MH/s ±5% and power draw near 400 W ±5% in default mode.

Does the Goldshell Mini Doge III box include a power supply unit?

This listing is without PSU; you must supply a compatible unit that delivers two 6-pin connectors.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.