我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Compact white ASIC miner with dual 6-pin power ports and Wi-Fi antenna

Goldshell

Goldshell Mini Doge III 700 MH/s 400 W Wi-Fi Litecoin Dogecoin without PSU mining hardware

SKU CH-GQM0-DKTT9

Compact ASIC miner for Litecoin and Dogecoin delivering 700 MH/s at 400 W with a 550 MH/s low-power mode at 260 W, dual 6-pin power and Wi-Fi

  • 700 MH/s default hashrate for strong LTC and DOGE mining
  • 400 W default draw keeps electricity cost predictable
  • 550 MH/s low-power mode at 260 W cuts running expense
  • Wi-Fi connectivity simplifies network setup without cables
  • Dual 6-pin power inputs ensure stable delivery to the ASIC board

Goldshell Mini Doge III ASIC Miner

The Goldshell Mini Doge III is an ASIC miner built for Litecoin and Dogecoin mining. It targets hobbyist or small-scale operators who want a compact, Wi-Fi enabled unit without an included power supply. Buyers needing higher throughput or multi-algorithm flexibility will find this single-purpose device limiting.

Hashrate and Power Profiles

Default operation delivers 700 MH/s at 400 W, while a low-power mode runs at 550 MH/s and 260 W. Both figures carry a ±5 % tolerance. The unit has no additional performance tiers, so operators must choose between maximum output or reduced electricity draw.

Dual 6-Pin Power Requirement

The chassis uses two 6-pin connectors for power input and both must be fully seated before start-up; running on a single connector is not supported. Wireless networking is built in for remote management, eliminating the need for a wired Ethernet link in typical home or small-farm deployments.

商品特色

  • 700 MH/s default hashrate for strong LTC and DOGE mining
  • 400 W default draw keeps electricity cost predictable
  • 550 MH/s low-power mode at 260 W cuts running expense
  • Wi-Fi connectivity simplifies network setup without cables
  • Dual 6-pin power inputs ensure stable delivery to the ASIC board

商品規格

本商品目前尚未公佈規格。

商品問答

Will the Goldshell Mini Doge III run on my existing 6-pin PSU cables?

The miner requires two 6-pin connectors fully seated; a single 6-pin cable is not sufficient and must not be used alone.

How can I verify the Goldshell Mini Doge III is hashing at the rated 700 MH/s after setup?

Check the dashboard for a reported hashrate near 700 MH/s ±5% and power draw near 400 W ±5% in default mode.

Does the Goldshell Mini Doge III box include a power supply unit?

This listing is without PSU; you must supply a compatible unit that delivers two 6-pin connectors.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。