Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

greenDracaena

greenDracaena D-SoftG14MM-group G1/4" 3/8" ID 1/2" OD Compression Fitting Silver 2 Pack

SKU CH-7Q0D-14YGN

Two silver G1/4" compression fittings connect 3/8" ID, 1/2" OD soft tubing with embedded O-ring seals for leak-free liquid cooling loops

  • Block MaterialBrass, Copper
  • Radiator Size2 pcs
  • Radiator MaterialBrass, Copper
  • Fan Size2 pcs
  • Fan Dim.0.86 in x 0.7 in x 0.86 in
  • Fan ConnectorG1/4"
  • Premium brass and copper construction ensures lasting corrosion resistance
  • G1/4 thread enables quick integration into standard liquid-cooling loops
  • Embedded O-ring design provides a secure leakproof seal
  • Compatible with 10×13 mm (3/8" ID, 1/2" OD) soft tubing for flexible routing
  • Compact 0.86 × 0.7 × 0.86 in size fits tight build spaces

Two-Pack G1/4" Soft-Tube Fittings

This pair of silver compression fittings connects 3/8" ID, 1/2" OD soft tubing to a standard G1/4" thread in a custom water-cooling loop. They are built from brass and copper with a chrome finish for corrosion resistance. The set suits builders assembling a new loop or extending an existing one. Each fitting weighs 1.76 ounces and measures .86 x .7 x .86 inches.

G1/4" Thread and 10×13 mm Hose Limit

The G1/4" UN thread is the only interface these fittings accept, so every block, radiator or pump port must match that pitch. Tubing must be exactly 10 mm inner diameter by 13 mm outer diameter (3/8" ID, 1/2" OD); larger or smaller hose will not seal. No adapter for other thread sizes or hose dimensions is included. The embedded O-ring provides the sole sealing surface, so surface finish on the mating port matters.

Hand-Tight Install With Leak-Test Step

Installation is a simple hand-tighten of the knurled collar onto the tubing and thread; no special tools are required. The most common issue is under-tightening, which leaves a microscopic weep path under pressure. Over-tightening can deform the soft tube and also cause leaks. The manufacturer stresses a full loop pressure test before powering the system to catch any seal failures.

Priekšrocības

  • Premium brass and copper construction ensures lasting corrosion resistance
  • G1/4 thread enables quick integration into standard liquid-cooling loops
  • Embedded O-ring design provides a secure leakproof seal
  • Compatible with 10×13 mm (3/8" ID, 1/2" OD) soft tubing for flexible routing
  • Compact 0.86 × 0.7 × 0.86 in size fits tight build spaces

Specifikācijas

BrandgreenDracaena
SeriesSoft Tube 1/2" OD (Silver)
ModelD-SoftG14MM-group
Part NumberD-RGKN-B38-Silver-2
Block MaterialBrass, Copper
Radiator Size2 pcs
Radiator MaterialBrass, Copper
Fan Size2 pcs
Fan Dim.0.86 in x 0.7 in x 0.86 in
Fan ConnectorG1/4"
ColorSilver
LED ColorSoft Tube 1/2" OD (Silver)
Tube MaterialBrass, Copper
Package ContentsO-rings

Jautājumi par šo preci

Should I pick the two-pack or look for a larger kit?

The product is sold as a two-piece pack; buy multiple packs if your loop needs more than two connection points.

What does the 0.86-inch dimension mean once the fitting is installed?

Each fitting measures 0.86 in long by 0.86 in wide by 0.7 in thick, so it adds that much length and bulk to every tube run.

The fitting uses a G1/4 thread — what tubing sizes does that actually support?

It accepts soft tubing with 3/8 in inner diameter and 1/2 in outer diameter (10×13 mm), sealing with the included O-rings.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.