Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch enterprise SSD with hot-swap carrier and label showing 100GB capacity

HP

HP 653122-B21 3.5" 100GB SATA enterprise SSD

SKU CH-RQKZ-8YPXE MPN 653122-B21

A 3.5" 100GB SATA enterprise SSD with MLC flash delivering up to 257 MBps read and 129 MBps write for server workloads

  • Form Factor3.5"
  • Capacity100GB
  • Memory ComponentsMLC
  • InterfaceSATA II
  • Max Sequential ReadUp to 257 MBps
  • Max Sequential WriteUp to 129 MBps
  • Enterprise-grade reliability with MLC NAND flash technology
  • 5 inch form factor fits standard server drive bays
  • Hot-swap capable for zero-downtime drive replacement
  • Up to 257 MBps sequential read for fast data access
  • Up to 32,000 IOPS random read accelerates transactional workloads

HP 100 GB SATA II Enterprise SSD

The HP 653122-B21 is a 3.5-inch enterprise solid-state drive with a 100 GB capacity and a SATA II interface. It uses MLC NAND flash and fits a standard LFF hot-swap carrier for HP ProLiant servers. Sequential reads reach up to 257 MBps while writes reach up to 129 MBps. Random 4 KB performance delivers up to 32,000 read IOPS and 6,000 write IOPS.

Suited for read-heavy server workloads

This drive targets mainstream enterprise applications such as boot volumes, local caching or read-intensive databases where low latency and consistent random reads matter. The MLC endurance profile and 7 W idle power suit always-on server environments. Builders needing higher write endurance, larger capacities or a 6 Gbps SATA link should consider other options.

SATA II 3 Gbps interface

The drive connects through a SATA II port limited to 3 Gbps throughput, which caps maximum sequential transfer rates below modern SATA III speeds. Verify that your server backplane or controller supports this generation before installation.

Priekšrocības

  • Enterprise-grade reliability with MLC NAND flash technology
  • 5 inch form factor fits standard server drive bays
  • Hot-swap capable for zero-downtime drive replacement
  • Up to 257 MBps sequential read for fast data access
  • Up to 32,000 IOPS random read accelerates transactional workloads

Specifikācijas

BrandHP
Model653122-B21
Form Factor3.5"
Capacity100GB
Memory ComponentsMLC
InterfaceSATA II
Max Sequential ReadUp to 257 MBps
Max Sequential WriteUp to 129 MBps
4KB Random ReadUp to 32,000 IOPS
4KB Random WriteUp to 6,000 IOPS
Power Consumption (Idle)7W
Operating Temperature0°C ~ +60°C
Height15.00mm
Sūtījuma svars1.36 kg
Sūtījuma izmēri279 × 229 × 152 mm

Jautājumi par šo preci

How much power does the 653122-B21 draw at idle and what is its operating temperature range?

The drive idles at 7W and is rated for 0°C to 60°C, so it stays cool and quiet inside a server chassis all day.

Does this 3.5-inch SATA II SSD need a hot-swap bay or a specific carrier to install in my ProLiant?

It ships with an HP SmartDrive carrier and fits a standard 3.5-inch hot-swap LFF bay; no extra caddy or adapter is required.

Will the SATA II interface on this 100GB MLC drive bottleneck my older RAID controller?

The 3Gb/s SATA II link caps sequential throughput at 257 MB/s read and 129 MB/s write, which matches legacy controllers without wasting their bandwidth.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.