Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 3.5 inch enterprise SSD with hot-swap carrier and label showing 100GB capacity

HP

HP 653122-B21 3.5" 100GB SATA enterprise SSD

SKU CH-RQKZ-8YPXE MPN 653122-B21

A 3.5" 100GB SATA enterprise SSD with MLC flash delivering up to 257 MBps read and 129 MBps write for server workloads

  • Form Factor3.5"
  • Capacity100GB
  • Memory ComponentsMLC
  • InterfaceSATA II
  • Max Sequential ReadUp to 257 MBps
  • Max Sequential WriteUp to 129 MBps
  • Enterprise-grade reliability with MLC NAND flash technology
  • 5 inch form factor fits standard server drive bays
  • Hot-swap capable for zero-downtime drive replacement
  • Up to 257 MBps sequential read for fast data access
  • Up to 32,000 IOPS random read accelerates transactional workloads

HP 100 GB SATA II Enterprise SSD

The HP 653122-B21 is a 3.5-inch enterprise solid-state drive with a 100 GB capacity and a SATA II interface. It uses MLC NAND flash and fits a standard LFF hot-swap carrier for HP ProLiant servers. Sequential reads reach up to 257 MBps while writes reach up to 129 MBps. Random 4 KB performance delivers up to 32,000 read IOPS and 6,000 write IOPS.

Suited for read-heavy server workloads

This drive targets mainstream enterprise applications such as boot volumes, local caching or read-intensive databases where low latency and consistent random reads matter. The MLC endurance profile and 7 W idle power suit always-on server environments. Builders needing higher write endurance, larger capacities or a 6 Gbps SATA link should consider other options.

SATA II 3 Gbps interface

The drive connects through a SATA II port limited to 3 Gbps throughput, which caps maximum sequential transfer rates below modern SATA III speeds. Verify that your server backplane or controller supports this generation before installation.

Helstu kostir

  • Enterprise-grade reliability with MLC NAND flash technology
  • 5 inch form factor fits standard server drive bays
  • Hot-swap capable for zero-downtime drive replacement
  • Up to 257 MBps sequential read for fast data access
  • Up to 32,000 IOPS random read accelerates transactional workloads

Tæknilýsing

BrandHP
Model653122-B21
Form Factor3.5"
Capacity100GB
Memory ComponentsMLC
InterfaceSATA II
Max Sequential ReadUp to 257 MBps
Max Sequential WriteUp to 129 MBps
4KB Random ReadUp to 32,000 IOPS
4KB Random WriteUp to 6,000 IOPS
Power Consumption (Idle)7W
Operating Temperature0°C ~ +60°C
Height15.00mm
Sendingarþyngd1.36 kg
Stærð sendingar279 × 229 × 152 mm

Spurningar um þessa vöru

How much power does the 653122-B21 draw at idle and what is its operating temperature range?

The drive idles at 7W and is rated for 0°C to 60°C, so it stays cool and quiet inside a server chassis all day.

Does this 3.5-inch SATA II SSD need a hot-swap bay or a specific carrier to install in my ProLiant?

It ships with an HP SmartDrive carrier and fits a standard 3.5-inch hot-swap LFF bay; no extra caddy or adapter is required.

Will the SATA II interface on this 100GB MLC drive bottleneck my older RAID controller?

The 3Gb/s SATA II link caps sequential throughput at 257 MB/s read and 129 MB/s write, which matches legacy controllers without wasting their bandwidth.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.