Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 2.5 inch SAS hard drive with green circuit board visible

HP

HP 653955-001 300GB 10k RPM 2.5" SAS internal hard drive

SKU CH-N986-E7KRP

A 300 GB 10 000 RPM 2.5 inch SAS hard drive for fast enterprise storage

  • 300 GB capacity for primary storage
  • 10 000 RPM spindle speed for fast access
  • 5 inch form factor fits compact bays
  • SAS 6 Gb/s interface for reliable throughput
  • HP Smart Drive carrier for tool-less installation

HP 300 GB 10k RPM SAS drive

This HP 653955-001 is a 300GB 2.5-inch internal hard drive spinning at 10k RPM. It connects through a 6G dual-port SAS interface. The drive is supplied new and carries part numbers 652564-B21 and 666355-001.

Suits 2.5-inch SAS bays.

This drive fits servers or arrays with 2.5-inch SAS hot-plug bays and a compatible 6G controller. Builders whose chassis accepts only 3.5-inch drive carriers cannot install this unit without an adapter.

6G dual-port SAS interface decides fit

The single specification that determines compatibility is the 6G dual-port SAS connection. Your backplane or RAID controller must support this exact interface for the drive to function.

Priekšrocības

  • 300 GB capacity for primary storage
  • 10 000 RPM spindle speed for fast access
  • 5 inch form factor fits compact bays
  • SAS 6 Gb/s interface for reliable throughput
  • HP Smart Drive carrier for tool-less installation

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I install the 2.5" SAS drive in a 3.5" bay and which step is often missed?

Mount the drive in a 2.5-to-3.5 adapter bracket, connect the SAS data and power cables, then enable the SAS controller in BIOS so the 6 Gbit/s link negotiates correctly.

What maintenance or replacement will the 300 GB 10k RPM SAS drive need later?

Plan to replace the drive after its rated service life; the mechanical 10k RPM spindle and SAS interface have no user-serviceable parts and SMART monitoring will signal wear.

What limit appears first during sustained writes on the 6 Gbit/s SAS interface?

The 6 Gbit/s SAS bus bandwidth becomes the bottleneck before the 10k RPM platters reach their maximum sustained transfer rate.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.