We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive with green circuit board visible

HP

HP 653955-001 300GB 10k RPM 2.5" SAS internal hard drive

SKU CH-N986-E7KRP

A 300 GB 10 000 RPM 2.5 inch SAS hard drive for fast enterprise storage

  • 300 GB capacity for primary storage
  • 10 000 RPM spindle speed for fast access
  • 5 inch form factor fits compact bays
  • SAS 6 Gb/s interface for reliable throughput
  • HP Smart Drive carrier for tool-less installation

HP 300 GB 10k RPM SAS drive

This HP 653955-001 is a 300GB 2.5-inch internal hard drive spinning at 10k RPM. It connects through a 6G dual-port SAS interface. The drive is supplied new and carries part numbers 652564-B21 and 666355-001.

Suits 2.5-inch SAS bays.

This drive fits servers or arrays with 2.5-inch SAS hot-plug bays and a compatible 6G controller. Builders whose chassis accepts only 3.5-inch drive carriers cannot install this unit without an adapter.

6G dual-port SAS interface decides fit

The single specification that determines compatibility is the 6G dual-port SAS connection. Your backplane or RAID controller must support this exact interface for the drive to function.

Highlights

  • 300 GB capacity for primary storage
  • 10 000 RPM spindle speed for fast access
  • 5 inch form factor fits compact bays
  • SAS 6 Gb/s interface for reliable throughput
  • HP Smart Drive carrier for tool-less installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 2.5" SAS drive in a 3.5" bay and which step is often missed?

Mount the drive in a 2.5-to-3.5 adapter bracket, connect the SAS data and power cables, then enable the SAS controller in BIOS so the 6 Gbit/s link negotiates correctly.

What maintenance or replacement will the 300 GB 10k RPM SAS drive need later?

Plan to replace the drive after its rated service life; the mechanical 10k RPM spindle and SAS interface have no user-serviceable parts and SMART monitoring will signal wear.

What limit appears first during sustained writes on the 6 Gbit/s SAS interface?

The 6 Gbit/s SAS bus bandwidth becomes the bottleneck before the 10k RPM platters reach their maximum sustained transfer rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.