Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

HP

HP ProLiant ML30 Gen10 Tower Server Xeon E-2124 16GB 16TB SATA

SKU CH-GYZ9-PD7Z1

Tower server with Xeon E-2124, 16GB DDR4, four 3.5-inch SATA drives totalling 16TB and iLO 5 remote management

  • Chassis TypeTower
  • Quad-core Xeon 3.3 GHz handles demanding workloads
  • 16 GB DDR4 2666 MHz memory supports smooth multitasking
  • 16 TB across four 3.5" 7.2K SATA drives stores large datasets
  • HP Smart Array S100i Gen10 provides hardware RAID protection
  • Dual-port 1 Gb Ethernet and iLO 5 enable remote management

HP ProLiant ML30 Gen10 Tower Server

This HP ProLiant ML30 Gen10 tower server is built for small businesses and remote offices needing a dedicated on-premise platform. It ships with an Intel Xeon E-2124 quad-core processor running at 3.3GHz with 8MB cache and 16GB of DDR4-2666 unbuffered memory. The bundle includes 16TB of storage across four 4TB 7.2K SATA 3.5-inch hard drives and a 16GB USB flash drive for data transfer. Assembly is required for the memory and drives.

Single power supply thermals and acoustics

A single non-redundant power supply delivers power to the Xeon E-2124 and four 3.5-inch SATA drives in a tower chassis designed for office environments. The 7.2K RPM hard drives and system fans generate audible noise typical of a departmental server under normal load. Power draw scales with the 3.3GHz quad-core CPU and the four spinning drives during typical file and application serving tasks.

iLO 5 and Smart Array S100i management

HP Integrated Lights Out 5 Standard provides remote firmware-level management, allowing administrators to monitor health, update firmware and control power state over the network without an operating system. The embedded HP Smart Array S100i Gen10 controller enables RAID configuration across the four included SATA drives for data redundancy. Dual-port 1Gb Ethernet and a DVD-ROM drive complete the baseline connectivity and media options.

Priekšrocības

  • Quad-core Xeon 3.3 GHz handles demanding workloads
  • 16 GB DDR4 2666 MHz memory supports smooth multitasking
  • 16 TB across four 3.5" 7.2K SATA drives stores large datasets
  • HP Smart Array S100i Gen10 provides hardware RAID protection
  • Dual-port 1 Gb Ethernet and iLO 5 enable remote management

Specifikācijas

Chassis TypeTower

Jautājumi par šo preci

How do I install the four 3.5-inch SATA hard drives and two 8GB DDR4 modules that ship loose?

Power off the tower, open the side panel, slide each 3.5-inch drive into a free bay and secure it, then press the two 8GB DDR4 modules into the DIMM slots until the latches click; finally connect the SATA data and power cables to the Smart Array S100i Gen10 controller.

Which components will need replacement first during the server's life?

The four 7.2K RPM SATA hard drives are mechanical and typically wear out before the solid-state memory, processor or single power supply, so plan to swap drives as they age.

What performance limit appears first when the Xeon E-2124 runs at 3.3GHz under constant load?

The single power supply and the 1Gb dual-port Ethernet adapter become bottlenecks before the quad-core CPU reaches its thermal ceiling during sustained workloads.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.