Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

HP

HP ProLiant ML30 Gen10 Tower Server Xeon E-2124 16GB 16TB SATA

SKU CH-GYZ9-PD7Z1

Tower server with Xeon E-2124, 16GB DDR4, four 3.5-inch SATA drives totalling 16TB and iLO 5 remote management

  • Chassis TypeTower
  • Quad-core Xeon 3.3 GHz handles demanding workloads
  • 16 GB DDR4 2666 MHz memory supports smooth multitasking
  • 16 TB across four 3.5" 7.2K SATA drives stores large datasets
  • HP Smart Array S100i Gen10 provides hardware RAID protection
  • Dual-port 1 Gb Ethernet and iLO 5 enable remote management

HP ProLiant ML30 Gen10 Tower Server

This HP ProLiant ML30 Gen10 tower server is built for small businesses and remote offices needing a dedicated on-premise platform. It ships with an Intel Xeon E-2124 quad-core processor running at 3.3GHz with 8MB cache and 16GB of DDR4-2666 unbuffered memory. The bundle includes 16TB of storage across four 4TB 7.2K SATA 3.5-inch hard drives and a 16GB USB flash drive for data transfer. Assembly is required for the memory and drives.

Single power supply thermals and acoustics

A single non-redundant power supply delivers power to the Xeon E-2124 and four 3.5-inch SATA drives in a tower chassis designed for office environments. The 7.2K RPM hard drives and system fans generate audible noise typical of a departmental server under normal load. Power draw scales with the 3.3GHz quad-core CPU and the four spinning drives during typical file and application serving tasks.

iLO 5 and Smart Array S100i management

HP Integrated Lights Out 5 Standard provides remote firmware-level management, allowing administrators to monitor health, update firmware and control power state over the network without an operating system. The embedded HP Smart Array S100i Gen10 controller enables RAID configuration across the four included SATA drives for data redundancy. Dual-port 1Gb Ethernet and a DVD-ROM drive complete the baseline connectivity and media options.

Høydepunkter

  • Quad-core Xeon 3.3 GHz handles demanding workloads
  • 16 GB DDR4 2666 MHz memory supports smooth multitasking
  • 16 TB across four 3.5" 7.2K SATA drives stores large datasets
  • HP Smart Array S100i Gen10 provides hardware RAID protection
  • Dual-port 1 Gb Ethernet and iLO 5 enable remote management

Spesifikasjoner

Chassis TypeTower

Spørsmål om denne varen

How do I install the four 3.5-inch SATA hard drives and two 8GB DDR4 modules that ship loose?

Power off the tower, open the side panel, slide each 3.5-inch drive into a free bay and secure it, then press the two 8GB DDR4 modules into the DIMM slots until the latches click; finally connect the SATA data and power cables to the Smart Array S100i Gen10 controller.

Which components will need replacement first during the server's life?

The four 7.2K RPM SATA hard drives are mechanical and typically wear out before the solid-state memory, processor or single power supply, so plan to swap drives as they age.

What performance limit appears first when the Xeon E-2124 runs at 3.3GHz under constant load?

The single power supply and the 1Gb dual-port Ethernet adapter become bottlenecks before the quad-core CPU reaches its thermal ceiling during sustained workloads.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.