Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

HP

HP S650 1.92TB 2.5" SATA III Internal SSD 345N1AA#ABA

SKU CH-CBZB-YGKZH

2.5-inch SATA SSD with 1.92TB capacity, 3D NAND, up to 560MB/s read and 500MB/s write for faster boots and file transfers

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity1.92TB
  • Memory Components3D NAND
  • InterfaceSATA III
  • Max Sequential ReadUp to 560 MBps

Options 1.92TB

  • 92 TB capacity stores large media libraries and project files
  • 560 MB/s sequential read speeds up boot and file loading
  • 500 MB/s sequential write speeds accelerate data transfers
  • 3D NAND with LDPC ECC maintains data integrity under heavy use
  • 5 inch SATA III form factor fits most laptops and desktops

Capacity and interface

The HP S650 is a 1.92 TB internal solid-state drive with a 2.5 inch form factor and a SATA III 6 Gb/s interface. It uses 3D NAND flash and a high-performance controller to deliver sequential reads up to 560 MB/s and writes up to 500 MB/s. The drive suits desktops and laptops needing a straightforward storage upgrade.

Sustained workload behaviour

LDPC error correction and an intelligent SLC cache help maintain data integrity and consistent throughput during extended transfers. A mean time between failures of 1,000,000 hours and vibration resistance rated at 3G indicate reliability under continuous operation. The SATA III link keeps latency low for mixed read and write tasks.

Thermals noise and power

With no moving parts the SSD runs silently and produces minimal heat in typical desktop or laptop use. Power draw stays modest compared with mechanical drives, helping battery life in portable systems. The 2.5 inch metal housing aids passive heat dissipation without requiring active cooling.

Priekšrocības

  • 92 TB capacity stores large media libraries and project files
  • 560 MB/s sequential read speeds up boot and file loading
  • 500 MB/s sequential write speeds accelerate data transfers
  • 3D NAND with LDPC ECC maintains data integrity under heavy use
  • 5 inch SATA III form factor fits most laptops and desktops

Specifikācijas

BrandHP
SeriesS650
Model345N1AA#ABA
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity1.92TB
Memory Components3D NAND
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 500 MBps
MTBF1,000,000 hours
Max Vibration Resistance3G

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the HP S650 1.92TB SSD run hot or draw much power during continuous daily use?

The SATA III interface and 3D NAND design keep power draw low and heat minimal, so the drive stays cool during all-day workloads without needing extra cooling.

Will the 2.5-inch SATA III connection fit my current laptop or desktop without extra parts?

Yes, the classic 2.5" form factor and standard SATA III interface connect directly to any mainstream laptop or desktop drive bay or caddy.

Can I use this 1.92TB SATA III drive alongside an older mechanical hard drive in the same system?

Absolutely — the SATA III interface works with existing SATA controllers, letting you run the HP S650 as a fast boot drive while keeping an older HDD for bulk storage.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.