Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

HPE

HPE 6 TB SAS 12Gb/s 3.5" 7200 RPM 512e internal hard drive 861754K21

SKU CH-5JN9-BAF8B

A 6 TB internal hard drive with a SAS 12Gb/s interface, 7200 RPM spindle speed and 512e format in a 3.5 inch carrier

  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • 6 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • 512e format ensures broad system compatibility
  • 5 inch form factor fits standard drive bays

Capacity and Interface

The HPE 6 TB internal hard drive uses a SAS 12Gb/s interface and a 3.5 inch form factor. It spins at 7200 RPM and stores data in a 512e format. The unit ships with a drive carrier included.

Server Storage Fit

This drive suits servers and storage arrays that accept 3.5 inch SAS drives with a 12Gb/s link. It is not for systems limited to smaller form factors or slower interface speeds.

Deciding Specification

The SAS 12Gb/s interface is the single specification that determines compatibility. Verify that your server backplane and controller support this exact standard before purchase.

Priekšrocības

  • 6 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • 512e format ensures broad system compatibility
  • 5 inch form factor fits standard drive bays

Specifikācijas

BrandHPE
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM

Jautājumi par šo preci

How do I install the 3.5" SAS 12Gb/s drive into a server bay, and which step is often missed?

Slide the supplied carrier into the LFF bay until the latch clicks, then connect both SAS data and power cables; the step most often missed is seating the carrier latch fully so the drive registers on the backplane.

What maintenance or replacement will the 6TB 7200 RPM 512e drive need later?

No scheduled maintenance is required; monitor SMART attributes for reallocated sectors and replace the drive once the error counters approach the vendor threshold.

What limit appears first on the 6TB SAS 12Gb/s midline drive during sustained writes?

The 7200 RPM spindle caps sequential throughput at the media transfer rate, so sustained write speed hits that mechanical ceiling before the 12Gb/s interface saturates.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.