Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

HPE

HPE 6 TB SAS 12Gb/s 3.5" 7200 RPM 512e internal hard drive 861754K21

SKU CH-5JN9-BAF8B

A 6 TB internal hard drive with a SAS 12Gb/s interface, 7200 RPM spindle speed and 512e format in a 3.5 inch carrier

  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • 6 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • 512e format ensures broad system compatibility
  • 5 inch form factor fits standard drive bays

Capacity and Interface

The HPE 6 TB internal hard drive uses a SAS 12Gb/s interface and a 3.5 inch form factor. It spins at 7200 RPM and stores data in a 512e format. The unit ships with a drive carrier included.

Server Storage Fit

This drive suits servers and storage arrays that accept 3.5 inch SAS drives with a 12Gb/s link. It is not for systems limited to smaller form factors or slower interface speeds.

Deciding Specification

The SAS 12Gb/s interface is the single specification that determines compatibility. Verify that your server backplane and controller support this exact standard before purchase.

I korthet

  • 6 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • 512e format ensures broad system compatibility
  • 5 inch form factor fits standard drive bays

Specifikationer

BrandHPE
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM

Frågor om den här produkten

How do I install the 3.5" SAS 12Gb/s drive into a server bay, and which step is often missed?

Slide the supplied carrier into the LFF bay until the latch clicks, then connect both SAS data and power cables; the step most often missed is seating the carrier latch fully so the drive registers on the backplane.

What maintenance or replacement will the 6TB 7200 RPM 512e drive need later?

No scheduled maintenance is required; monitor SMART attributes for reallocated sectors and replace the drive once the error counters approach the vendor threshold.

What limit appears first on the 6TB SAS 12Gb/s midline drive during sustained writes?

The 7200 RPM spindle caps sequential throughput at the media transfer rate, so sustained write speed hits that mechanical ceiling before the 12Gb/s interface saturates.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.