Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver metal power supply module with ventilation grilles and rear connector

HPE

HPE J9829A#ABB 5400R 1100W PoE+ zl2 server power supply

SKU CH-HFWR-XXNAF

Standard PoE+ power module for 5400R zl2 switches delivering 1100 watts at 120 V or 230 V AC

  • Switch TypePower Module
  • ProtocolsHCRP, SPP
  • Standard PoE+ power for 5400R zl2 switches
  • Delivers up to 1100 watts of output power
  • Accepts 120 V AC or 230 V AC input voltage
  • Compact 5.1" high form factor fits dense racks
  • Weighs approximately 6.04 lb for easy handling

1100 W PoE+ module for 5400R zl2

This power module slots into HPE 5400R zl2 switch chassis and delivers up to 1100 watts of PoE+ budget. It is designed for network teams who need to power phones, cameras and access points from the switch itself. The unit accepts 120 V AC or 230 V AC input without manual switching. It operates as a standard hot-pluggable power module within the supported chassis.

Capacity headroom at 1100 watts

The 1100 watt rating covers dense PoE+ deployments where many ports draw the full 30 W simultaneously. Headroom remains adequate for typical access-layer stacks with mixed device loads. The module will reach its limit when the combined PoE draw and switch overhead exceed the rated output, so planning the port budget is essential. No higher-capacity variant is described in the supplied data.

Hot-plug build with dual-voltage input

The module measures 5.1 inches high, 7.4 inches wide and 6.2 inches deep, weighing approximately 6.04 lb. Its form factor matches the 5400R zl2 power bay, allowing tool-less insertion and removal while the switch stays online. Dual-voltage acceptance (120 V AC and 230 V AC) simplifies deployment across sites with different mains standards. The unit supports HCRP and SPP protocols for power management within the chassis.

Priekšrocības

  • Standard PoE+ power for 5400R zl2 switches
  • Delivers up to 1100 watts of output power
  • Accepts 120 V AC or 230 V AC input voltage
  • Compact 5.1" high form factor fits dense racks
  • Weighs approximately 6.04 lb for easy handling

Specifikācijas

BrandHPE
Switch TypePower Module
ProtocolsHCRP, SPP

Jautājumi par šo preci

Will the 5400R 1100W PoE+ zl2 power supply fit in the same bay as the older 5400R zl2 modules I already use?

Yes — it shares the 5.1" height, 7.4" width and 6.2" depth of the standard zl2 form factor, so it slides into the existing chassis slot without modification.

How can I confirm the J9829A#ABB unit is delivering 1100 W to my 5400R zl2 switch after installation?

The switch management interface reports real-time power draw and PoE+ budget; a green input-power LED on the module face also shows normal operation.

Does the J9829A#ABB package include the power supply only, or are cables and mounting hardware supplied?

The box contains the 6.04 lb power module; an AC cord for 120 V or 230 V mains and any rack-mount brackets are not included and must be sourced separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.