暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver metal power supply module with ventilation grilles and rear connector

HPE

HPE J9829A#ABB 5400R 1100W PoE+ zl2 server power supply

SKU CH-HFWR-XXNAF

Standard PoE+ power module for 5400R zl2 switches delivering 1100 watts at 120 V or 230 V AC

  • Switch TypePower Module
  • ProtocolsHCRP, SPP
  • Standard PoE+ power for 5400R zl2 switches
  • Delivers up to 1100 watts of output power
  • Accepts 120 V AC or 230 V AC input voltage
  • Compact 5.1" high form factor fits dense racks
  • Weighs approximately 6.04 lb for easy handling

1100 W PoE+ module for 5400R zl2

This power module slots into HPE 5400R zl2 switch chassis and delivers up to 1100 watts of PoE+ budget. It is designed for network teams who need to power phones, cameras and access points from the switch itself. The unit accepts 120 V AC or 230 V AC input without manual switching. It operates as a standard hot-pluggable power module within the supported chassis.

Capacity headroom at 1100 watts

The 1100 watt rating covers dense PoE+ deployments where many ports draw the full 30 W simultaneously. Headroom remains adequate for typical access-layer stacks with mixed device loads. The module will reach its limit when the combined PoE draw and switch overhead exceed the rated output, so planning the port budget is essential. No higher-capacity variant is described in the supplied data.

Hot-plug build with dual-voltage input

The module measures 5.1 inches high, 7.4 inches wide and 6.2 inches deep, weighing approximately 6.04 lb. Its form factor matches the 5400R zl2 power bay, allowing tool-less insertion and removal while the switch stays online. Dual-voltage acceptance (120 V AC and 230 V AC) simplifies deployment across sites with different mains standards. The unit supports HCRP and SPP protocols for power management within the chassis.

特長

  • Standard PoE+ power for 5400R zl2 switches
  • Delivers up to 1100 watts of output power
  • Accepts 120 V AC or 230 V AC input voltage
  • Compact 5.1" high form factor fits dense racks
  • Weighs approximately 6.04 lb for easy handling

仕様

BrandHPE
Switch TypePower Module
ProtocolsHCRP, SPP

この商品に関する質問

Will the 5400R 1100W PoE+ zl2 power supply fit in the same bay as the older 5400R zl2 modules I already use?

Yes — it shares the 5.1" height, 7.4" width and 6.2" depth of the standard zl2 form factor, so it slides into the existing chassis slot without modification.

How can I confirm the J9829A#ABB unit is delivering 1100 W to my 5400R zl2 switch after installation?

The switch management interface reports real-time power draw and PoE+ budget; a green input-power LED on the module face also shows normal operation.

Does the J9829A#ABB package include the power supply only, or are cables and mounting hardware supplied?

The box contains the 6.04 lb power module; an AC cord for 120 V or 230 V mains and any rack-mount brackets are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。