Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5-inch bare enterprise hard drive with SATA connector

HPE

HPE MB6000GEBTP 6TB 7.2K SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-50VQ-QN6KY

A 6 TB enterprise-class 3.5-inch hard drive spinning at 7200 RPM on a SATA 6.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • UsageFor Enterprise Storage
  • Form Factor3.5"
  • 6 TB capacity supports large enterprise datasets
  • 7200 RPM spindle speed delivers consistent throughput
  • SATA 6.0 Gb/s interface enables direct host connection
  • 5 inch form factor fits standard drive bays
  • Ultrastar 7K6000 series engineered for enterprise storage

Enterprise 6TB 3.5" SATA drive

The HPE Ultrastar 7K6000 MB6000GEBTP is a 6TB 3.5-inch internal hard drive built for enterprise storage arrays. It spins at 7200 RPM and connects via a SATA 6.0Gb/s interface. The drive is supplied as a bare unit without mounting accessories.

Suited for capacity-focused arrays.

This drive fits administrators who need high-capacity, 7200 RPM storage for bulk data, backups or near-line workloads in compatible HPE servers. Buyers who require the lower latency or higher IOPS of solid-state media should consider flash-based alternatives instead.

SATA 6.0Gb/s interface

The single specification that determines fit is the SATA 6.0Gb/s interface; the host system must provide a matching SATA port and backplane support for 3.5-inch enterprise drives. Without that connection the drive cannot be installed or used.

Priekšrocības

  • 6 TB capacity supports large enterprise datasets
  • 7200 RPM spindle speed delivers consistent throughput
  • SATA 6.0 Gb/s interface enables direct host connection
  • 5 inch form factor fits standard drive bays
  • Ultrastar 7K6000 series engineered for enterprise storage

Specifikācijas

BrandHPE
SeriesUltrastar 7K6000
ModelMB6000GEBTP
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity6TB
RPM7200 RPM
UsageFor Enterprise Storage
Form Factor3.5"

Jautājumi par šo preci

How do I verify the MB6000GEBTP is running at 7200 RPM after installation?

Check the drive’s reported rotational speed in the server BIOS, RAID controller utility, or operating system disk information; it should read 7200 RPM for the Ultrastar 7K6000 series.

What comes with the bare drive MB6000GEBTP and what must I supply?

Only the 3.5" enterprise hard drive is included; you must provide SATA data and power cables, mounting screws, a compatible drive bay or caddy, and a SATA 6.0Gb/s host controller.

Which part number matches the 6TB SATA 6.0Gb/s 7.2K 3.5" enterprise drive I need?

MB6000GEBTP is the model; HP PN 753873-001, GPN 797456-002, Option PN 797269-B21, Spare PN 797521-001 and 753874-B21 all refer to this same 6TB unit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.