Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 3.5-inch bare enterprise hard drive with SATA connector

HPE

HPE MB6000GEBTP 6TB 7.2K SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-50VQ-QN6KY

A 6 TB enterprise-class 3.5-inch hard drive spinning at 7200 RPM on a SATA 6.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • UsageFor Enterprise Storage
  • Form Factor3.5"
  • 6 TB capacity supports large enterprise datasets
  • 7200 RPM spindle speed delivers consistent throughput
  • SATA 6.0 Gb/s interface enables direct host connection
  • 5 inch form factor fits standard drive bays
  • Ultrastar 7K6000 series engineered for enterprise storage

Enterprise 6TB 3.5" SATA drive

The HPE Ultrastar 7K6000 MB6000GEBTP is a 6TB 3.5-inch internal hard drive built for enterprise storage arrays. It spins at 7200 RPM and connects via a SATA 6.0Gb/s interface. The drive is supplied as a bare unit without mounting accessories.

Suited for capacity-focused arrays.

This drive fits administrators who need high-capacity, 7200 RPM storage for bulk data, backups or near-line workloads in compatible HPE servers. Buyers who require the lower latency or higher IOPS of solid-state media should consider flash-based alternatives instead.

SATA 6.0Gb/s interface

The single specification that determines fit is the SATA 6.0Gb/s interface; the host system must provide a matching SATA port and backplane support for 3.5-inch enterprise drives. Without that connection the drive cannot be installed or used.

Helstu kostir

  • 6 TB capacity supports large enterprise datasets
  • 7200 RPM spindle speed delivers consistent throughput
  • SATA 6.0 Gb/s interface enables direct host connection
  • 5 inch form factor fits standard drive bays
  • Ultrastar 7K6000 series engineered for enterprise storage

Tæknilýsing

BrandHPE
SeriesUltrastar 7K6000
ModelMB6000GEBTP
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity6TB
RPM7200 RPM
UsageFor Enterprise Storage
Form Factor3.5"

Spurningar um þessa vöru

How do I verify the MB6000GEBTP is running at 7200 RPM after installation?

Check the drive’s reported rotational speed in the server BIOS, RAID controller utility, or operating system disk information; it should read 7200 RPM for the Ultrastar 7K6000 series.

What comes with the bare drive MB6000GEBTP and what must I supply?

Only the 3.5" enterprise hard drive is included; you must provide SATA data and power cables, mounting screws, a compatible drive bay or caddy, and a SATA 6.0Gb/s host controller.

Which part number matches the 6TB SATA 6.0Gb/s 7.2K 3.5" enterprise drive I need?

MB6000GEBTP is the model; HP PN 753873-001, GPN 797456-002, Option PN 797269-B21, Spare PN 797521-001 and 753874-B21 all refer to this same 6TB unit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.