Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
3.5 inch SAS hard drive in silver metal caddy

IBM

IBM HUS156030VLS600 300GB 15000RPM 3.5" SAS internal hard drive

SKU CH-HJGF-HRRCR

A 300 GB 15000 RPM SAS hard drive in a 3.5 inch form factor with an included IBM System X caddy

  • 300 GB capacity stores large server datasets
  • 15 000 RPM spindle delivers fast transactional throughput
  • SAS 6 Gbps interface connects to compatible controllers
  • 5 inch form factor fits standard drive bays
  • Includes IBM System X caddy for quick installation

300 GB 15 000 RPM SAS drive

This IBM HUS156030VLS600 is a 300 GB internal hard drive spinning at 15 000 RPM on a 3.5 inch SAS 6 Gbps interface. It ships new with the original IBM System X caddy and shows zero powered-on hours.

Suits high-IOPS server workloads

The 15 000 RPM spindle and SAS interface target transaction-heavy databases, virtualisation hosts and high-performance RAID arrays where low latency matters. It is not for users who need larger capacity per spindle, solid-state silence, or a different physical interface.

Deciding spec: 15 000 RPM spindle speed

The 15 000 RPM rotational speed is the single figure that determines whether this drive meets the random-access latency your workload demands. Verify that your backplane and controller support 3.5 inch SAS 6 Gbps before ordering.

Priekšrocības

  • 300 GB capacity stores large server datasets
  • 15 000 RPM spindle delivers fast transactional throughput
  • SAS 6 Gbps interface connects to compatible controllers
  • 5 inch form factor fits standard drive bays
  • Includes IBM System X caddy for quick installation

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I fit the 3.5" SAS HUS156030VLS600 into the supplied IBM System X caddy?

Slide the drive into the tray until the connector seats on the backplane, then secure it with the four side screws before inserting the assembly into the server bay.

What part will need replacement first on a 15000RPM SAS drive run continuously?

The motor and bearing assembly typically reaches its rated service life before the media, so plan a swap after the manufacturer's suggested power-on hours.

At what point does the 6Gbps SAS link become the bottleneck during sustained writes?

Sequential throughput caps at the interface's 6Gbps ceiling, so the bus saturates before the 15000RPM platters reach their maximum media rate.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.