暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
3.5 inch SAS hard drive in silver metal caddy

IBM

IBM HUS156030VLS600 300GB 15000RPM 3.5" SAS internal hard drive

SKU CH-HJGF-HRRCR

A 300 GB 15000 RPM SAS hard drive in a 3.5 inch form factor with an included IBM System X caddy

  • 300 GB capacity stores large server datasets
  • 15 000 RPM spindle delivers fast transactional throughput
  • SAS 6 Gbps interface connects to compatible controllers
  • 5 inch form factor fits standard drive bays
  • Includes IBM System X caddy for quick installation

300 GB 15 000 RPM SAS drive

This IBM HUS156030VLS600 is a 300 GB internal hard drive spinning at 15 000 RPM on a 3.5 inch SAS 6 Gbps interface. It ships new with the original IBM System X caddy and shows zero powered-on hours.

Suits high-IOPS server workloads

The 15 000 RPM spindle and SAS interface target transaction-heavy databases, virtualisation hosts and high-performance RAID arrays where low latency matters. It is not for users who need larger capacity per spindle, solid-state silence, or a different physical interface.

Deciding spec: 15 000 RPM spindle speed

The 15 000 RPM rotational speed is the single figure that determines whether this drive meets the random-access latency your workload demands. Verify that your backplane and controller support 3.5 inch SAS 6 Gbps before ordering.

特長

  • 300 GB capacity stores large server datasets
  • 15 000 RPM spindle delivers fast transactional throughput
  • SAS 6 Gbps interface connects to compatible controllers
  • 5 inch form factor fits standard drive bays
  • Includes IBM System X caddy for quick installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I fit the 3.5" SAS HUS156030VLS600 into the supplied IBM System X caddy?

Slide the drive into the tray until the connector seats on the backplane, then secure it with the four side screws before inserting the assembly into the server bay.

What part will need replacement first on a 15000RPM SAS drive run continuously?

The motor and bearing assembly typically reaches its rated service life before the media, so plan a swap after the manufacturer's suggested power-on hours.

At what point does the 6Gbps SAS link become the bottleneck during sustained writes?

Sequential throughput caps at the interface's 6Gbps ceiling, so the bus saturates before the 15000RPM platters reach their maximum media rate.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。