iStarUSA Inc. D-410B10SA-BLUE 4U Server Chassis 10 Hot-Swap Bays 2x 120mm Fans Blue
- Rackmount
- 4U
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
iStarUSA Inc.
A 4U rackmount chassis holds ten hot-swap drive bays and two 120mm fans in zinc-coated steel
Model D-410-B10SA-RED
The iStarUSA D-410-B10SA-RED is a 4U rackmount server chassis built from zinc-coated steel in a red finish. It accepts motherboards up to 12.00" x 13.00" and provides ten front-access hot-swap drive bays for high-density storage deployments. Two pre-installed 120mm fans deliver baseline airflow through the 25.00" deep enclosure. Front-panel USB ports, power and HDD LEDs, plus power and reset switches complete the operator interface.
This chassis replaces tower cases or rack units that rely on fixed internal drive cages and limited front access. The jump is worth it when a workload demands ten removable drives in a standard 4U footprint without converting a full-depth cabinet. Builds that require only a few drives or need deeper expansion card clearance beyond the 7.00" height may find the bay count excessive or the form factor restrictive.
Under continuous load the dual 120mm fans maintain steady airflow across all ten drive bays, preventing localized heat buildup during extended rebuilds or streaming workloads. The zinc-coated steel body resists corrosion in humid rack rooms, preserving structural rigidity over years of service. Operators monitoring the front LEDs can verify drive activity and power status without opening the rack door.
| Brand | iStarUSA |
|---|---|
| Model | D-410-B10SA-RED |
| Chassis Type | Rackmount |
| Form Factor | 4U |
| Color | Red |
| Case Material | Zinc-Coated Steel |
| Motherboard Compatibility | 12.00" x 13.00" |
| Hot-Swap Drive Bays | 10 |
| Front Ports | USB |
| 120mm Fans | 2 |
| Features | Power and HDD LED Power and Reset Switch |
| Dimensions | 25.00" x 19.00" x 7.00" |
| Sūtījuma svars | 16.78 kg |
| Sūtījuma izmēri | 711 × 584 × 305 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The chassis is 25.00 inches deep, so the rack must provide at least that much usable depth plus cable clearance behind the rear panel.
Insert each drive carrier until the latch clicks; the step often missed is fully seating the carrier so the backplane connector engages and the LED lights.
Clean fan blades and intake vents regularly; replace a fan if bearing noise appears, and reseat drive carriers if a bay stops detecting drives.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?