iStarUSA Inc. D-410B10SA-BLUE 4U Server Chassis 10 Hot-Swap Bays 2x 120mm Fans Blue
- Rackmount
- 4U
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
iStarUSA Inc.
A 4U rackmount chassis holds ten hot-swap drive bays and two 120mm fans in zinc-coated steel
Model D-410-B10SA-RED
The iStarUSA D-410-B10SA-RED is a 4U rackmount server chassis built from zinc-coated steel in a red finish. It accepts motherboards up to 12.00" x 13.00" and provides ten front-access hot-swap drive bays for high-density storage deployments. Two pre-installed 120mm fans deliver baseline airflow through the 25.00" deep enclosure. Front-panel USB ports, power and HDD LEDs, plus power and reset switches complete the operator interface.
This chassis replaces tower cases or rack units that rely on fixed internal drive cages and limited front access. The jump is worth it when a workload demands ten removable drives in a standard 4U footprint without converting a full-depth cabinet. Builds that require only a few drives or need deeper expansion card clearance beyond the 7.00" height may find the bay count excessive or the form factor restrictive.
Under continuous load the dual 120mm fans maintain steady airflow across all ten drive bays, preventing localized heat buildup during extended rebuilds or streaming workloads. The zinc-coated steel body resists corrosion in humid rack rooms, preserving structural rigidity over years of service. Operators monitoring the front LEDs can verify drive activity and power status without opening the rack door.
| Brand | iStarUSA |
|---|---|
| Model | D-410-B10SA-RED |
| Chassis Type | Rackmount |
| Form Factor | 4U |
| Color | Red |
| Case Material | Zinc-Coated Steel |
| Motherboard Compatibility | 12.00" x 13.00" |
| Hot-Swap Drive Bays | 10 |
| Front Ports | USB |
| 120mm Fans | 2 |
| Features | Power and HDD LED Power and Reset Switch |
| Dimensions | 25.00" x 19.00" x 7.00" |
| Prepravná hmotnosť | 16.78 kg |
| Rozmery balenia | 711 × 584 × 305 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The chassis is 25.00 inches deep, so the rack must provide at least that much usable depth plus cable clearance behind the rear panel.
Insert each drive carrier until the latch clicks; the step often missed is fully seating the carrier so the backplane connector engages and the LED lights.
Clean fan blades and intake vents regularly; replace a fan if bearing noise appears, and reseat drive carriers if a bay stops detecting drives.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?