Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular PCB with multiple pin headers and two temperature probes

iStarUSA Inc.

iStarUSA Inc. TC-ISF08 Fan Sensor Board 8 Fans 50/60/70°C case accessory

SKU CH-VER0-KTHRM MPN TC-ISF08

Monitors two temperatures and up to eight fans with selectable 50, 60 or 70 °C alarms and a single motherboard header

  • FeaturesInternal temperature and fan failure alarm board
  • Monitors two internal temperature zones for early overheating detection
  • Supports up to 8 fans with single-header failure reporting
  • Adjustable thermal alarm triggers at 50, 60, or 70 °C
  • LED connector gives instant visual warning of faults
  • Alarm reset switch silences alerts until repairs are made

Fan monitoring board for I-Star D-Storm

The iStarUSA TC-ISF08 is an internal monitoring board designed for I-Star D-Storm cases. It tracks temperature at two points and watches up to 8 fans for failures. Power comes from a single Molex connector. Selectable jumpers set the thermal alarm threshold at 50, 60, or 70 °C.

Suited for critical-temperature systems

This board fits builders who need a single summarised fan-failure signal and visual LED alerts for a multi-fan chassis. It is not for users whose case lacks the specific D-Storm mounting points or connector layout. It is also not for setups that require per-fan RPM reporting rather than a combined fault line.

Dual-sensor thermal alarm with three thresholds

The decisive spec is the selectable alarm trigger at 50, 60, or 70 °C. Two included sensors let you monitor separate zones and the board sounds an alarm when either zone crosses the chosen limit. An onboard reset switch silences the alert until the hardware issue is fixed.

Priekšrocības

  • Monitors two internal temperature zones for early overheating detection
  • Supports up to 8 fans with single-header failure reporting
  • Adjustable thermal alarm triggers at 50, 60, or 70 °C
  • LED connector gives instant visual warning of faults
  • Alarm reset switch silences alerts until repairs are made

Specifikācijas

BrandiStarUSA
ModelTC-ISF08
FeaturesInternal temperature and fan failure alarm board
Sūtījuma svars0.91 kg
Sūtījuma izmēri102 × 102 × 102 mm

Jautājumi par šo preci

Does the TC-ISF08 board itself contain any moving parts or consumable components that will need replacement later?

The board is a solid-state monitoring circuit with no moving parts; the only replaceable items are the two external temperature probes and up to eight fans that connect to it.

What is the first thermal limit the board will signal during sustained operation?

The lowest selectable alarm threshold is 50 °C, set by the onboard jumper, so that temperature is the first limit the board will report.

How much heat or noise does the TC-ISF08 add when it runs continuously?

The board draws power from a single Molex connector and has no fan of its own, so it adds negligible heat and no audible noise during all-day operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.