نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular PCB with multiple pin headers and two temperature probes

iStarUSA Inc.

iStarUSA Inc. TC-ISF08 Fan Sensor Board 8 Fans 50/60/70°C case accessory

SKU CH-VER0-KTHRM MPN TC-ISF08

Monitors two temperatures and up to eight fans with selectable 50, 60 or 70 °C alarms and a single motherboard header

  • FeaturesInternal temperature and fan failure alarm board
  • Monitors two internal temperature zones for early overheating detection
  • Supports up to 8 fans with single-header failure reporting
  • Adjustable thermal alarm triggers at 50, 60, or 70 °C
  • LED connector gives instant visual warning of faults
  • Alarm reset switch silences alerts until repairs are made

Fan monitoring board for I-Star D-Storm

The iStarUSA TC-ISF08 is an internal monitoring board designed for I-Star D-Storm cases. It tracks temperature at two points and watches up to 8 fans for failures. Power comes from a single Molex connector. Selectable jumpers set the thermal alarm threshold at 50, 60, or 70 °C.

Suited for critical-temperature systems

This board fits builders who need a single summarised fan-failure signal and visual LED alerts for a multi-fan chassis. It is not for users whose case lacks the specific D-Storm mounting points or connector layout. It is also not for setups that require per-fan RPM reporting rather than a combined fault line.

Dual-sensor thermal alarm with three thresholds

The decisive spec is the selectable alarm trigger at 50, 60, or 70 °C. Two included sensors let you monitor separate zones and the board sounds an alarm when either zone crosses the chosen limit. An onboard reset switch silences the alert until the hardware issue is fixed.

أبرز المميزات

  • Monitors two internal temperature zones for early overheating detection
  • Supports up to 8 fans with single-header failure reporting
  • Adjustable thermal alarm triggers at 50, 60, or 70 °C
  • LED connector gives instant visual warning of faults
  • Alarm reset switch silences alerts until repairs are made

المواصفات

BrandiStarUSA
ModelTC-ISF08
FeaturesInternal temperature and fan failure alarm board
وزن الشحنة0.91 kg
أبعاد الطرد102 × 102 × 102 mm

أسئلة حول هذا المنتج

Does the TC-ISF08 board itself contain any moving parts or consumable components that will need replacement later?

The board is a solid-state monitoring circuit with no moving parts; the only replaceable items are the two external temperature probes and up to eight fans that connect to it.

What is the first thermal limit the board will signal during sustained operation?

The lowest selectable alarm threshold is 50 °C, set by the onboard jumper, so that temperature is the first limit the board will report.

How much heat or noise does the TC-ISF08 add when it runs continuously?

The board draws power from a single Molex connector and has no fan of its own, so it adds negligible heat and no audible noise during all-day operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.