Jungle Leopard Prism6 MAX 120mm ARGB case fan White 1-pack
- 1 Fan
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Jungle Leopard
A 120 mm reverse-blade ARGB case fan with hydraulic bearing, 800–1850 RPM, 58.36 CFM airflow and 29 dBA noise
Color White Reverse-1Pack
The Jungle Leopard Prism6 MAX is a single 120 mm case fan with a reverse-blade layout and hydraulic bearing. It targets builders who want controllable airflow direction and addressable RGB lighting in a white finish. The unit spins between 800 and 1850 RPM while producing 29 dBA at typical speed.
The fan uses layered 0.5 mm mirrors on both sides and a central circular mirror to create a depth effect visible from multiple angles. A 5 V 3-pin ARGB header is required for motherboard synchronisation; without it a separate controller box must be added. The magnetic base and silicone pads simplify mounting and reduce vibration.
Speed control relies on a standard 4-pin PWM connection, while lighting depends on a 5 V 3-pin header that not all mainboards provide. Maximum airflow reaches 58.36 CFM with 2.07 mmH₂O static pressure, figures suited to typical case ventilation but not extreme radiator stacks. Buyers needing higher static pressure or 12 V RGB ecosystems should look elsewhere.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 MAX |
| Model | JL Prism6 MAX BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1850RPM |
| Air Flow | 58.36CFM |
| Air Pressure | 2.07mmH20 |
| Noise Level | =29DBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The hydraulic bearing is sealed for life and requires no routine maintenance; replacement is only needed if the fan fails after extended use.
Sustained operation at 1850 RPM is capped by the 29 dBA noise rating, which becomes the practical ceiling before thermal or bearing limits.
The 5 V 3-pin ARGB circuit draws only a few watts, adding negligible heat while the fan itself stays at 29 dBA under full load.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?