Jungle Leopard Prism6 MAX 120mm ARGB case fan White 1-pack
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Jungle Leopard
A 120 mm reverse-blade ARGB case fan with hydraulic bearing, 800–1850 RPM, 58.36 CFM airflow and 29 dBA noise
Color White Reverse-1Pack
The Jungle Leopard Prism6 MAX is a single 120 mm case fan with a reverse-blade layout and hydraulic bearing. It targets builders who want controllable airflow direction and addressable RGB lighting in a white finish. The unit spins between 800 and 1850 RPM while producing 29 dBA at typical speed.
The fan uses layered 0.5 mm mirrors on both sides and a central circular mirror to create a depth effect visible from multiple angles. A 5 V 3-pin ARGB header is required for motherboard synchronisation; without it a separate controller box must be added. The magnetic base and silicone pads simplify mounting and reduce vibration.
Speed control relies on a standard 4-pin PWM connection, while lighting depends on a 5 V 3-pin header that not all mainboards provide. Maximum airflow reaches 58.36 CFM with 2.07 mmH₂O static pressure, figures suited to typical case ventilation but not extreme radiator stacks. Buyers needing higher static pressure or 12 V RGB ecosystems should look elsewhere.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 MAX |
| Model | JL Prism6 MAX BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1850RPM |
| Air Flow | 58.36CFM |
| Air Pressure | 2.07mmH20 |
| Noise Level | =29DBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The hydraulic bearing is sealed for life and requires no routine maintenance; replacement is only needed if the fan fails after extended use.
Sustained operation at 1850 RPM is capped by the 29 dBA noise rating, which becomes the practical ceiling before thermal or bearing limits.
The 5 V 3-pin ARGB circuit draws only a few watts, adding negligible heat while the fan itself stays at 29 dBA under full load.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?