Jungle Leopard Prism6 PRO ARGB 120mm case fan Black 1600RPM 61.5CFM 2mmH2O HDB PWM 3/4 Pin
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Jungle Leopard
Three 120 mm PWM fans with reverse blades, infinite-mirror ARGB lighting and hydraulic bearings deliver 61.5 CFM at 1600 RPM while staying at 30 dBA
Color White Reverse-3Pack
This three-pack supplies three 120mm ARGB case fans finished in white for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydraulic bearing and a 3/4-pin PWM connector for motherboard-controlled speed curves. The reverse-blade design moves air in the opposite direction to standard fans for specialised intake or exhaust layouts.
The Prism6 PRO series features an infinite mirror effect with three-sided lens ARGB illumination that requires a 3-pin 5V addressable header on the motherboard or a compatible controller for synchronisation. Hydraulic bearings reduce friction and noise while maintaining a rated noise level of = 30dBA at full speed. Four self-tapping screws per fan are included for straightforward mounting on case panels or radiators.
Fan speed ranges from 765 to 1600RPM ± 10% under PWM control, delivering 61.5CFM airflow and 2mmH2O static pressure at the top end. The 2mmH2O pressure figure limits effectiveness on dense radiator fins or restrictive mesh where higher static pressure would be needed. The 25mm thickness fits standard 120mm mounting points but may not clear ultra-slim chassis designs.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 PRO |
| Model | JL Prism6 PRO BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1600RPM |
| Air Flow | 61.5CFM |
| Air Pressure | 2mmH2O |
| Noise Level | = 30dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 4-pin PWM connector allows the motherboard to vary speed between 765 and 1600 RPM; the 3-pin mode runs at full voltage, so speed control is lost.
It fits any standard 120 mm mount with 25 mm depth; allow at least 25 mm behind the frame for the reverse-blade motor housing and cable bend radius.
A separate 3-pin 5 V ARGB header must be plugged into the motherboard or a controller; forgetting this cable leaves the infinite-mirror LEDs dark.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?