Jungle Leopard Prism6 PRO ARGB 120mm case fan Black 1600RPM 61.5CFM 2mmH2O HDB PWM 3/4 Pin
- 1 Fan
- Case Fan
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Jungle Leopard
Three 120 mm PWM fans with reverse blades, infinite-mirror ARGB lighting and hydraulic bearings deliver 61.5 CFM at 1600 RPM while staying at 30 dBA
Color White Reverse-3Pack
This three-pack supplies three 120mm ARGB case fans finished in white for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydraulic bearing and a 3/4-pin PWM connector for motherboard-controlled speed curves. The reverse-blade design moves air in the opposite direction to standard fans for specialised intake or exhaust layouts.
The Prism6 PRO series features an infinite mirror effect with three-sided lens ARGB illumination that requires a 3-pin 5V addressable header on the motherboard or a compatible controller for synchronisation. Hydraulic bearings reduce friction and noise while maintaining a rated noise level of = 30dBA at full speed. Four self-tapping screws per fan are included for straightforward mounting on case panels or radiators.
Fan speed ranges from 765 to 1600RPM ± 10% under PWM control, delivering 61.5CFM airflow and 2mmH2O static pressure at the top end. The 2mmH2O pressure figure limits effectiveness on dense radiator fins or restrictive mesh where higher static pressure would be needed. The 25mm thickness fits standard 120mm mounting points but may not clear ultra-slim chassis designs.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 PRO |
| Model | JL Prism6 PRO BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1600RPM |
| Air Flow | 61.5CFM |
| Air Pressure | 2mmH2O |
| Noise Level | = 30dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The 4-pin PWM connector allows the motherboard to vary speed between 765 and 1600 RPM; the 3-pin mode runs at full voltage, so speed control is lost.
It fits any standard 120 mm mount with 25 mm depth; allow at least 25 mm behind the frame for the reverse-blade motor housing and cable bend radius.
A separate 3-pin 5 V ARGB header must be plugged into the motherboard or a controller; forgetting this cable leaves the infinite-mirror LEDs dark.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?