Jungle Leopard Prism6 PRO ARGB 120mm case fan Black 1600RPM 61.5CFM 2mmH2O HDB PWM 3/4 Pin
- 1 Fan
- Case Fan
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Jungle Leopard
Three 120 mm PWM fans with reverse blades, infinite-mirror ARGB lighting and hydraulic bearings deliver 61.5 CFM at 1600 RPM while staying at 30 dBA
Color White Reverse-3Pack
This three-pack supplies three 120mm ARGB case fans finished in white for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydraulic bearing and a 3/4-pin PWM connector for motherboard-controlled speed curves. The reverse-blade design moves air in the opposite direction to standard fans for specialised intake or exhaust layouts.
The Prism6 PRO series features an infinite mirror effect with three-sided lens ARGB illumination that requires a 3-pin 5V addressable header on the motherboard or a compatible controller for synchronisation. Hydraulic bearings reduce friction and noise while maintaining a rated noise level of = 30dBA at full speed. Four self-tapping screws per fan are included for straightforward mounting on case panels or radiators.
Fan speed ranges from 765 to 1600RPM ± 10% under PWM control, delivering 61.5CFM airflow and 2mmH2O static pressure at the top end. The 2mmH2O pressure figure limits effectiveness on dense radiator fins or restrictive mesh where higher static pressure would be needed. The 25mm thickness fits standard 120mm mounting points but may not clear ultra-slim chassis designs.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 PRO |
| Model | JL Prism6 PRO BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1600RPM |
| Air Flow | 61.5CFM |
| Air Pressure | 2mmH2O |
| Noise Level | = 30dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The 4-pin PWM connector allows the motherboard to vary speed between 765 and 1600 RPM; the 3-pin mode runs at full voltage, so speed control is lost.
It fits any standard 120 mm mount with 25 mm depth; allow at least 25 mm behind the frame for the reverse-blade motor housing and cable bend radius.
A separate 3-pin 5 V ARGB header must be plugged into the motherboard or a controller; forgetting this cable leaves the infinite-mirror LEDs dark.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?