Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver ATX power supply unit with 14-pin connector visible

KHACHIMO

KHACHIMO 14Pin 500W power supply

SKU CH-YTQM-KHEQC

Delivers 500 W via a 14-pin ATX design with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for silent, low-power sleep

  • TypeATX
  • Faster wake-from-sleep with Modern Standby support
  • Lower electricity draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power from resonant LLC with DC-to-DC conversion
  • Fits 14-pin ATX systems requiring 500W output

ATX power supply with 14-pin connector

This 500 W ATX unit uses a 14-pin main connector and is built for systems that require this specific pin layout. It carries 80 PLUS Gold certification and supports Modern Standby for rapid wake-from-sleep. The resonant LLC topology with DC-to-DC conversion delivers stable output and helps reduce coil whine. It suits builders replacing an FSP500-50ETN, FSP500-50AGPA, FSP450-50ETN or HK380-16FP unit.

Practical limits of the 14-pin interface

The 14-pin main connector is not interchangeable with the standard 24-pin ATX header found on most current motherboards. Using this unit requires a motherboard designed for the 14-pin layout or a verified adapter that matches the pin-out exactly. The 500 W rating sets the total power ceiling for all rails combined. Zero RPM fan mode operates only at low and medium loads, so the fan will spin under heavier demand.

Installation notes and common issues

Installation is straightforward when the motherboard natively accepts the 14-pin connector; simply seat the plug firmly and secure the unit with four screws. Builders often discover the connector mismatch only after opening the case, so verify the board header before purchasing. Cable routing space varies by chassis, and the fixed cable set cannot be reduced. Coil whine is minimised by the topology, but a small number of units may still exhibit faint noise under specific loads.

Priekšrocības

  • Faster wake-from-sleep with Modern Standby support
  • Lower electricity draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power from resonant LLC with DC-to-DC conversion
  • Fits 14-pin ATX systems requiring 500W output

Specifikācijas

TypeATX

Jautājumi par šo preci

Should I choose the FSP500-50ETN, FSP500-50AGPA, FSP450-50ETN or HK380-16FP model?

The FSP500-50ETN and FSP500-50AGPA are 500W units, the FSP450-50ETN is 450W, and the HK380-16FP is 380W; pick the wattage that matches or exceeds your system's peak power draw.

What does the 500W rating mean once installed in my PC?

It means the unit can continuously deliver up to 500 watts to your components combined; your actual draw depends on the CPU, GPU and other parts you have installed.

Is the 14-pin connector a standard ATX interface and what limits does it impose?

The PSU uses an ATX form factor with a 14-pin main connector designed for specific proprietary boards; it will only power motherboards that accept that exact pin-out.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.