NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
KHACHIMO
Delivers 500 W via a 14-pin ATX design with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for silent, low-power sleep
This 500 W ATX unit uses a 14-pin main connector and is built for systems that require this specific pin layout. It carries 80 PLUS Gold certification and supports Modern Standby for rapid wake-from-sleep. The resonant LLC topology with DC-to-DC conversion delivers stable output and helps reduce coil whine. It suits builders replacing an FSP500-50ETN, FSP500-50AGPA, FSP450-50ETN or HK380-16FP unit.
The 14-pin main connector is not interchangeable with the standard 24-pin ATX header found on most current motherboards. Using this unit requires a motherboard designed for the 14-pin layout or a verified adapter that matches the pin-out exactly. The 500 W rating sets the total power ceiling for all rails combined. Zero RPM fan mode operates only at low and medium loads, so the fan will spin under heavier demand.
Installation is straightforward when the motherboard natively accepts the 14-pin connector; simply seat the plug firmly and secure the unit with four screws. Builders often discover the connector mismatch only after opening the case, so verify the board header before purchasing. Cable routing space varies by chassis, and the fixed cable set cannot be reduced. Coil whine is minimised by the topology, but a small number of units may still exhibit faint noise under specific loads.
| Type | ATX |
|---|
The FSP500-50ETN and FSP500-50AGPA are 500W units, the FSP450-50ETN is 450W, and the HK380-16FP is 380W; pick the wattage that matches or exceeds your system's peak power draw.
It means the unit can continuously deliver up to 500 watts to your components combined; your actual draw depends on the CPU, GPU and other parts you have installed.
The PSU uses an ATX form factor with a 14-pin main connector designed for specific proprietary boards; it will only power motherboards that accept that exact pin-out.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?