Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver ATX power supply unit with ventilation grille and label sticker

KHACHIMO

KHACHIMO 180W ATX Power Supply DPS-180AB-15 A

SKU CH-AET3-XZQWY

An 180W ATX power supply tested working for compatible HP systems

  • TypeATX
  • 180 W output powers compact ATX builds
  • Tested working so the unit arrives ready to install
  • Replaces HP part numbers 742317-001 and 751589-001
  • Compatible with chassis models 200, 280 G1, 500 and 110

180W ATX replacement unit

The KHACHIMO DPS-180AB-15 A is a new ATX power supply rated at 180W. It matches part numbers 742317-001 and 751589-001 for direct replacement in compatible systems. The unit has been tested working and is supplied in good quality condition.

Capacity and headroom

At 180W this supply handles basic desktop loads and low-power components. It will not support discrete graphics cards or high-wattage processors that exceed its output. Builders needing more headroom for additional drives or expansion cards should select a higher-capacity unit.

Priekšrocības

  • 180 W output powers compact ATX builds
  • Tested working so the unit arrives ready to install
  • Replaces HP part numbers 742317-001 and 751589-001
  • Compatible with chassis models 200, 280 G1, 500 and 110

Specifikācijas

TypeATX

Jautājumi par šo preci

Will this 180W ATX power supply fit and power an older motherboard that uses a standard 24-pin ATX connector?

The unit follows the ATX form factor and is tested working, so it will connect to any motherboard with a matching 24-pin ATX socket and power components within its 180W limit.

How can I confirm the DPS-180AB-15 A is delivering stable power after installation?

Power on the system and verify it boots reliably; use a multimeter on the main connector pins to check the output voltages match the ATX specification.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.