Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular silver ATX power supply unit with ventilation grille and label sticker

KHACHIMO

KHACHIMO 180W ATX Power Supply DPS-180AB-15 A

SKU CH-AET3-XZQWY

An 180W ATX power supply tested working for compatible HP systems

  • TypeATX
  • 180 W output powers compact ATX builds
  • Tested working so the unit arrives ready to install
  • Replaces HP part numbers 742317-001 and 751589-001
  • Compatible with chassis models 200, 280 G1, 500 and 110

180W ATX replacement unit

The KHACHIMO DPS-180AB-15 A is a new ATX power supply rated at 180W. It matches part numbers 742317-001 and 751589-001 for direct replacement in compatible systems. The unit has been tested working and is supplied in good quality condition.

Capacity and headroom

At 180W this supply handles basic desktop loads and low-power components. It will not support discrete graphics cards or high-wattage processors that exceed its output. Builders needing more headroom for additional drives or expansion cards should select a higher-capacity unit.

Poudarki

  • 180 W output powers compact ATX builds
  • Tested working so the unit arrives ready to install
  • Replaces HP part numbers 742317-001 and 751589-001
  • Compatible with chassis models 200, 280 G1, 500 and 110

Specifikacije

TypeATX

Vprašanja o tem izdelku

Will this 180W ATX power supply fit and power an older motherboard that uses a standard 24-pin ATX connector?

The unit follows the ATX form factor and is tested working, so it will connect to any motherboard with a matching 24-pin ATX socket and power components within its 180W limit.

How can I confirm the DPS-180AB-15 A is delivering stable power after installation?

Power on the system and verify it boots reliably; use a multimeter on the main connector pins to check the output voltages match the ATX specification.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.