Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular ATX power supply unit with metal casing and ventilation grille

KHACHIMO

KHACHIMO FLATPACK 1500 48V 241114.100 power supply

SKU CH-YF9Z-FWBBR

Delivers 1500 W at 48 V in an ATX form factor for communication equipment

  • TypeATX
  • Delivers 1500 W of continuous power for demanding loads
  • Operates at a stable 48 V DC for telecom and server racks
  • Verified tested and working before dispatch
  • Flatpack form factor fits dense cabinet installations

KHACHIMO FLATPACK 1500 48V Power Supply

The KHACHIMO FLATPACK 1500 48V is a communication power supply built to the ATX form factor. It delivers a 48 V output with a 1500 W capacity for telecom or industrial equipment racks. The unit is supplied new and has been tested working by the supplier. It suits engineers who need a high-voltage DC source in a standard chassis slot.

Thermals and Power Draw

The supply converts mains power to 48 V DC at up to 1500 W, so heat output scales with the connected load. Internal fans move air through the chassis to keep component temperatures stable during continuous operation. Acoustic noise varies with fan speed, which rises as the drawn current increases. Efficiency losses appear as waste heat that the enclosure must exhaust.

Priekšrocības

  • Delivers 1500 W of continuous power for demanding loads
  • Operates at a stable 48 V DC for telecom and server racks
  • Verified tested and working before dispatch
  • Flatpack form factor fits dense cabinet installations

Specifikācijas

TypeATX

Jautājumi par šo preci

How do I install the KHACHIMO FLATPACK 1500 48V 241114.100 in an ATX chassis?

Mount the unit in the standard ATX power-supply bay using the four rear screws, connect the 24-pin ATX main cable to the motherboard, then attach the 48 V output leads to the communication equipment; the step often missed is securing the output terminals before powering on.

What maintenance will the KHACHIMO FLATPACK 1500 48V 241114.100 need over time?

Periodically vacuum dust from the intake vents and verify the internal fan spins freely; if output voltage drifts or the unit shuts down under load, plan to replace the power supply.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.