Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular ATX power supply unit with metal casing and ventilation grille

KHACHIMO

KHACHIMO FLATPACK 1500 48V 241114.100 power supply

SKU CH-YF9Z-FWBBR

Delivers 1500 W at 48 V in an ATX form factor for communication equipment

  • TypeATX
  • Delivers 1500 W of continuous power for demanding loads
  • Operates at a stable 48 V DC for telecom and server racks
  • Verified tested and working before dispatch
  • Flatpack form factor fits dense cabinet installations

KHACHIMO FLATPACK 1500 48V Power Supply

The KHACHIMO FLATPACK 1500 48V is a communication power supply built to the ATX form factor. It delivers a 48 V output with a 1500 W capacity for telecom or industrial equipment racks. The unit is supplied new and has been tested working by the supplier. It suits engineers who need a high-voltage DC source in a standard chassis slot.

Thermals and Power Draw

The supply converts mains power to 48 V DC at up to 1500 W, so heat output scales with the connected load. Internal fans move air through the chassis to keep component temperatures stable during continuous operation. Acoustic noise varies with fan speed, which rises as the drawn current increases. Efficiency losses appear as waste heat that the enclosure must exhaust.

Helstu kostir

  • Delivers 1500 W of continuous power for demanding loads
  • Operates at a stable 48 V DC for telecom and server racks
  • Verified tested and working before dispatch
  • Flatpack form factor fits dense cabinet installations

Tæknilýsing

TypeATX

Spurningar um þessa vöru

How do I install the KHACHIMO FLATPACK 1500 48V 241114.100 in an ATX chassis?

Mount the unit in the standard ATX power-supply bay using the four rear screws, connect the 24-pin ATX main cable to the motherboard, then attach the 48 V output leads to the communication equipment; the step often missed is securing the output terminals before powering on.

What maintenance will the KHACHIMO FLATPACK 1500 48V 241114.100 need over time?

Periodically vacuum dust from the intake vents and verify the internal fan spins freely; if output voltage drifts or the unit shuts down under load, plan to replace the power supply.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.