Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
KHACHIMO LCA75S-6 switching power supply unit open frame 6V 12.5A 75W

KHACHIMO

KHACHIMO LCA75S-6 Switching Power Supply 6V 12.5A 75W

SKU CH-DM34-H31Q9

Provides 6V at 12.5A delivering up to 75W for ATX systems

  • TypeATX
  • Delivers 75 W continuous output for stable 6 V operation
  • Supplies 12.5 A peak current to handle demanding loads
  • ATX form factor fits standard chassis mounting points
  • Tested working and verified for reliable performance

KHACHIMO LCA75S-6 6V 75W ATX Power Supply

The KHACHIMO LCA75S-6 is a switching power supply delivering 6 volts at 12.5 amps for a total of 75 watts. It follows the ATX form factor and arrives as an original disassembly unit that has been tested working. This unit suits builds or replacements requiring a dedicated 6V rail at this output level.

Suits 6V ATX applications only

This supply fits systems designed specifically for a 6V 75W ATX source. Builds needing different voltages, higher wattage, or alternative form factors should look elsewhere. It is not intended for standard multi-rail PC configurations requiring 12V or 5V primary outputs.

Priekšrocības

  • Delivers 75 W continuous output for stable 6 V operation
  • Supplies 12.5 A peak current to handle demanding loads
  • ATX form factor fits standard chassis mounting points
  • Tested working and verified for reliable performance

Specifikācijas

TypeATX

Jautājumi par šo preci

How do I install this ATX power supply and which cable routing step is most often missed?

Mount the unit in the case with the four standard ATX screws, connect the 24-pin motherboard cable and any 6 V peripheral leads, then secure all cables away from fans — forgetting the cable tie-down step is the most common oversight.

What maintenance will this 75 W 6 V 12.5 A supply need over time?

Dust the intake vents every few months and verify the fan spins freely; the internal electrolytic capacitors will eventually age, so plan on replacing the unit if output voltage drifts or ripple increases.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.