Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
KHACHIMO LCA75S-6 switching power supply unit open frame 6V 12.5A 75W

KHACHIMO

KHACHIMO LCA75S-6 Switching Power Supply 6V 12.5A 75W

SKU CH-DM34-H31Q9

Provides 6V at 12.5A delivering up to 75W for ATX systems

  • TypeATX
  • Delivers 75 W continuous output for stable 6 V operation
  • Supplies 12.5 A peak current to handle demanding loads
  • ATX form factor fits standard chassis mounting points
  • Tested working and verified for reliable performance

KHACHIMO LCA75S-6 6V 75W ATX Power Supply

The KHACHIMO LCA75S-6 is a switching power supply delivering 6 volts at 12.5 amps for a total of 75 watts. It follows the ATX form factor and arrives as an original disassembly unit that has been tested working. This unit suits builds or replacements requiring a dedicated 6V rail at this output level.

Suits 6V ATX applications only

This supply fits systems designed specifically for a 6V 75W ATX source. Builds needing different voltages, higher wattage, or alternative form factors should look elsewhere. It is not intended for standard multi-rail PC configurations requiring 12V or 5V primary outputs.

Punti di forza

  • Delivers 75 W continuous output for stable 6 V operation
  • Supplies 12.5 A peak current to handle demanding loads
  • ATX form factor fits standard chassis mounting points
  • Tested working and verified for reliable performance

Caratteristiche tecniche

TypeATX

Domande su questo articolo

How do I install this ATX power supply and which cable routing step is most often missed?

Mount the unit in the case with the four standard ATX screws, connect the 24-pin motherboard cable and any 6 V peripheral leads, then secure all cables away from fans — forgetting the cable tie-down step is the most common oversight.

What maintenance will this 75 W 6 V 12.5 A supply need over time?

Dust the intake vents every few months and verify the fan spins freely; the internal electrolytic capacitors will eventually age, so plan on replacing the unit if output voltage drifts or ripple increases.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.