Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
KHACHIMO N2power XL125-12CS ATX power supply unit

KHACHIMO

KHACHIMO N2power XL125-12CS XL125-3 +12V 10.5A power supply

SKU CH-0BMV-JF3X6

An ATX power supply delivering 125 watts on the +12 V rail at 10.5 amps, first listed in March 2024

  • TypeATX
  • ATX form factor fits standard PC chassis
  • Single +12 V rail delivers 10.5 A for stable CPU and GPU power
  • 125 W rated output supports mid-range system builds
  • Tested working before shipment to ensure reliable operation
  • First listed by the manufacturer in March 2024

Compact ATX power supply

The KHACHIMO N2power XL125-12CS delivers a 125 W ATX power supply in a compact form factor. It provides a single +12 V rail rated at 10.5 A for modern component demands. This unit suits builders assembling space-constrained systems or replacing an existing ATX supply. It is not for configurations that require multiple 12 V rails or higher total wattage.

Sustained-load behaviour

The supply is specified for continuous operation at its full 125 W rating rather than a short peak figure. A single +12 V rail simplifies load balancing across CPU and GPU under prolonged stress. Stable output is maintained across the rated current without the voltage droop seen in multi-rail designs. It is not for workloads that demand sustained power beyond the rated output.

ATX interface limits

The ATX form factor defines the physical mounting and connector layout used by this 125 W unit. Standard ATX connectors limit the maximum deliverable current per pin, capping the +12 V rail at 10.5 A in this implementation. Total system power cannot exceed 125 W regardless of connector count. It is not for builds that need EPS12V or PCIe connectors beyond the standard ATX complement.

Priekšrocības

  • ATX form factor fits standard PC chassis
  • Single +12 V rail delivers 10.5 A for stable CPU and GPU power
  • 125 W rated output supports mid-range system builds
  • Tested working before shipment to ensure reliable operation
  • First listed by the manufacturer in March 2024

Specifikācijas

TypeATX

Jautājumi par šo preci

How much heat does the 125 W unit add to a case running all day?

The supply delivers 125 W on the +12 V rail at 10.5 A; waste heat equals the difference between AC draw and that DC output, so case airflow must handle the gap.

Which motherboard power connectors must my board already provide for this ATX supply?

Standard ATX installation needs a 24-pin main connector plus the CPU 4-pin or 8-pin auxiliary plug; verify your board has both before fitting the unit.

Will the +12 V 10.5 A output run an older graphics card that needs a 6-pin PCIe connector?

The rail supplies 125 W total; if the legacy card draws within that budget and you add a 6-pin adapter, the supply can power it.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.