Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
KHACHIMO N2power XL125-12CS ATX power supply unit

KHACHIMO

KHACHIMO N2power XL125-12CS XL125-3 +12V 10.5A power supply

SKU CH-0BMV-JF3X6

An ATX power supply delivering 125 watts on the +12 V rail at 10.5 amps, first listed in March 2024

  • TypeATX
  • ATX form factor fits standard PC chassis
  • Single +12 V rail delivers 10.5 A for stable CPU and GPU power
  • 125 W rated output supports mid-range system builds
  • Tested working before shipment to ensure reliable operation
  • First listed by the manufacturer in March 2024

Compact ATX power supply

The KHACHIMO N2power XL125-12CS delivers a 125 W ATX power supply in a compact form factor. It provides a single +12 V rail rated at 10.5 A for modern component demands. This unit suits builders assembling space-constrained systems or replacing an existing ATX supply. It is not for configurations that require multiple 12 V rails or higher total wattage.

Sustained-load behaviour

The supply is specified for continuous operation at its full 125 W rating rather than a short peak figure. A single +12 V rail simplifies load balancing across CPU and GPU under prolonged stress. Stable output is maintained across the rated current without the voltage droop seen in multi-rail designs. It is not for workloads that demand sustained power beyond the rated output.

ATX interface limits

The ATX form factor defines the physical mounting and connector layout used by this 125 W unit. Standard ATX connectors limit the maximum deliverable current per pin, capping the +12 V rail at 10.5 A in this implementation. Total system power cannot exceed 125 W regardless of connector count. It is not for builds that need EPS12V or PCIe connectors beyond the standard ATX complement.

Prednosti

  • ATX form factor fits standard PC chassis
  • Single +12 V rail delivers 10.5 A for stable CPU and GPU power
  • 125 W rated output supports mid-range system builds
  • Tested working before shipment to ensure reliable operation
  • First listed by the manufacturer in March 2024

Špecifikácie

TypeATX

Otázky k tomuto produktu

How much heat does the 125 W unit add to a case running all day?

The supply delivers 125 W on the +12 V rail at 10.5 A; waste heat equals the difference between AC draw and that DC output, so case airflow must handle the gap.

Which motherboard power connectors must my board already provide for this ATX supply?

Standard ATX installation needs a 24-pin main connector plus the CPU 4-pin or 8-pin auxiliary plug; verify your board has both before fitting the unit.

Will the +12 V 10.5 A output run an older graphics card that needs a 6-pin PCIe connector?

The rail supplies 125 W total; if the legacy card draws within that budget and you add a 6-pin adapter, the supply can power it.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.