Kingston Technology Corp. Fury Renegade KF560C32RSAK2-96 96GB (2 x 48GB) DDR5 6000 CL32
- 96GB (2 x 48GB)
- 288-Pin PC RAM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Kingston Technology Corp.
A 96GB dual-channel DDR5 kit running at 6000 MT/s with CL32 timings and 1.35V operation
LED Color None
Kingston Fury Renegade delivers 96GB across two 48GB modules running at DDR5 6000 with a CL32 latency of 32-38-38-76. The dual-channel kit operates at 1.35V and includes Intel XMP 3.0 profiles for automatic configuration. It is built for workstations and high-end gaming rigs that need maximum memory density.
Builders using older chipsets or boards limited to lower DDR5 speeds should verify motherboard qualification lists before purchasing. Systems that only support single-rank modules or capacities below 48GB per slot will not be compatible with this 2Rx8 design.
Each stick packs 48GB in a 2Rx8 layout using sixteen 3G x 8-bit components. Motherboards must explicitly support 48GB non-binary modules to run this kit at its rated DDR5 6000 CL32 settings.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade |
| Model | KF560C32RSK2-96 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38-76 |
| Voltage | 1.35V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Silver / Black |
| Features | Kingston FURY KF560C32RSK2-96 is a kit of two 6G x 64-bit (48GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 3G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 96GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| Recommend Use | AMD & Intel Compatible / AMD B650 / AMD Ryzen Compatible / AMD X670 / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z690 / Intel Z790 |
| LED Color | None |
| Sūtījuma svars | 0.16 kg |
| Sūtījuma izmēri | 171 × 127 × 15 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The modules default to JEDEC DDR5 4800 at 1.1 V with 40-39-39 timing. To reach DDR5 6000 CL32 at 1.35 V you must enable the Intel XMP 3.0 profile in the BIOS.
Each kit is a matched pair tested together. Adding a second kit creates four modules total; the memory controller must then run all four at a common speed and timing, which may require manual tuning.
They are the primary latencies at DDR5 6000: CAS latency 32, RAS to CAS delay 38, RAS precharge 38, and cycle time 76. Lower values reduce access delay at a given data rate.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?