저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two silver and black DDR5 memory modules with low-profile heat spreaders

Kingston Technology Corp.

Kingston Technology Corp. Fury Renegade 96GB (2 x 48GB) DDR5 6000 CL32 desktop RAM KF560C32RSK2-96

SKU CH-TVHE-DX63F MPN KF560C32RSK2-96

A 96GB dual-channel DDR5 kit running at 6000 MT/s with CL32 timings and 1.35V operation

  • Capacity96GB (2 x 48GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL32
  • Timing32-38-38-76
  • Voltage1.35V

LED Color None

  • Massive 96 GB capacity for heavy workloads
  • DDR5-6000 speed with PC5 48000 bandwidth
  • Low CL32 latency and 32-38-38-76 timings
  • Efficient 1.35 V operation via Intel XMP 3.0
  • Dual-channel kit tested for AMD and Intel platforms

High-capacity DDR5 kit for desktop systems

Kingston Fury Renegade delivers 96GB across two 48GB modules running at DDR5 6000 with a CL32 latency of 32-38-38-76. The dual-channel kit operates at 1.35V and includes Intel XMP 3.0 profiles for automatic configuration. It is built for workstations and high-end gaming rigs that need maximum memory density.

Suited for Intel 600, 700 series

Builders using older chipsets or boards limited to lower DDR5 speeds should verify motherboard qualification lists before purchasing. Systems that only support single-rank modules or capacities below 48GB per slot will not be compatible with this 2Rx8 design.

Deciding spec: 48GB per module density

Each stick packs 48GB in a 2Rx8 layout using sixteen 3G x 8-bit components. Motherboards must explicitly support 48GB non-binary modules to run this kit at its rated DDR5 6000 CL32 settings.

주요 특징

  • Massive 96 GB capacity for heavy workloads
  • DDR5-6000 speed with PC5 48000 bandwidth
  • Low CL32 latency and 32-38-38-76 timings
  • Efficient 1.35 V operation via Intel XMP 3.0
  • Dual-channel kit tested for AMD and Intel platforms

사양

BrandKingston
SeriesFury Renegade
ModelKF560C32RSK2-96
Capacity96GB (2 x 48GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL32
Timing32-38-38-76
Voltage1.35V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorSilver / Black
FeaturesKingston FURY KF560C32RSK2-96 is a kit of two 6G x 64-bit
(48GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 2Rx8,
memory module, based on sixteen 3G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 3.0. Total kit capacity is 96GB. Each
module has been tested to run at DDR5-6000 at a low latency timing
of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Recommend UseAMD & Intel Compatible / AMD B650 / AMD Ryzen Compatible / AMD X670 / High Performance or Gaming Memory / Intel 600 Series / Intel 700 Series / Intel B660 / Intel Compatible / Intel Z690 / Intel Z790
LED ColorNone
배송 무게0.16 kg
포장 크기171 × 127 × 15 mm

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this kit run at DDR5 6000 on a motherboard that only supports JEDEC speeds?

The modules default to JEDEC DDR5 4800 at 1.1 V with 40-39-39 timing. To reach DDR5 6000 CL32 at 1.35 V you must enable the Intel XMP 3.0 profile in the BIOS.

My board has four DIMM slots. Can I populate two slots now and add a second identical kit later?

Each kit is a matched pair tested together. Adding a second kit creates four modules total; the memory controller must then run all four at a common speed and timing, which may require manual tuning.

What do the timing numbers 32-38-38-76 mean for real-world use?

They are the primary latencies at DDR5 6000: CAS latency 32, RAS to CAS delay 38, RAS precharge 38, and cycle time 76. Lower values reduce access delay at a given data rate.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.