Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board module with silver heat spreader and gold edge connectors

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2D8F5/1GI 1GB DDR2 667 ECC Fully Buffered server RAM

SKU CH-ATEY-R8HZQ MPN KVR667D2D8F5/1GI

1GB DDR2 667 ECC fully buffered server memory with CL5 latency and a heat spreader

  • Capacity1GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCYes
  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on high-density channels
  • DDR2 667 (PC2 5300) speed matches legacy platform specs
  • CAS latency CL5 keeps timing tight for reliable throughput
  • 240-pin DDR2 form factor with heat spreader aids cooling

Server Memory Module

Kingston KVR667D2D8F5/1GI is a 1GB DDR2 667 (PC2 5300) module built for servers that require fully buffered ECC memory. It uses a 240-pin interface, runs at 1.80V with CL5 latency, and includes a heat spreader. The stick is Intel certified and listed as new condition.

Suited For And Not

This module suits administrators maintaining legacy DDR2 platforms that specifically call for fully buffered ECC DIMMs. It is not for systems that accept only unbuffered or registered non-FB-DIMM memory, nor for boards limited to a different pin count or voltage. Buyers needing higher capacity per slot should look elsewhere.

Deciding Specification

The defining specification is the fully buffered DDR2 667 (PC2 5300) design with ECC and a 240-pin form factor. Only motherboards that explicitly support FB-DIMM DDR2 at this speed and voltage can use it. Match the memory type exactly or the module will not function.

Priekšrocības

  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on high-density channels
  • DDR2 667 (PC2 5300) speed matches legacy platform specs
  • CAS latency CL5 keeps timing tight for reliable throughput
  • 240-pin DDR2 form factor with heat spreader aids cooling

Specifikācijas

BrandKingston
ModelKVR667D2D8F5/1GI
Capacity1GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCYes
Buffered/RegisteredFully Buffered
Heat SpreaderYes
Sūtījuma svars0.07 kg
Sūtījuma izmēri171 × 57 × 13 mm

Jautājumi par šo preci

Does the 240-pin DDR2 module fit a standard FB-DIMM slot?

Yes, the 240-pin DDR2 SDRAM form factor matches the FB-DIMM slot used for fully buffered memory.

What is the correct orientation step when installing this ECC fully buffered stick?

Align the notch on the 240-pin edge connector with the key in the FB-DIMM slot, then press firmly until the retention clips click shut.

Will the attached heat spreader need any maintenance or replacement over time?

The integrated heat spreader is a passive component with no moving parts and requires no scheduled maintenance or replacement.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.