Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board module with silver heat spreader and gold edge connectors

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2D8F5/1GI 1GB DDR2 667 ECC Fully Buffered server RAM

SKU CH-ATEY-R8HZQ MPN KVR667D2D8F5/1GI

1GB DDR2 667 ECC fully buffered server memory with CL5 latency and a heat spreader

  • Capacity1GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCYes
  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on high-density channels
  • DDR2 667 (PC2 5300) speed matches legacy platform specs
  • CAS latency CL5 keeps timing tight for reliable throughput
  • 240-pin DDR2 form factor with heat spreader aids cooling

Server Memory Module

Kingston KVR667D2D8F5/1GI is a 1GB DDR2 667 (PC2 5300) module built for servers that require fully buffered ECC memory. It uses a 240-pin interface, runs at 1.80V with CL5 latency, and includes a heat spreader. The stick is Intel certified and listed as new condition.

Suited For And Not

This module suits administrators maintaining legacy DDR2 platforms that specifically call for fully buffered ECC DIMMs. It is not for systems that accept only unbuffered or registered non-FB-DIMM memory, nor for boards limited to a different pin count or voltage. Buyers needing higher capacity per slot should look elsewhere.

Deciding Specification

The defining specification is the fully buffered DDR2 667 (PC2 5300) design with ECC and a 240-pin form factor. Only motherboards that explicitly support FB-DIMM DDR2 at this speed and voltage can use it. Match the memory type exactly or the module will not function.

Kohokohdat

  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on high-density channels
  • DDR2 667 (PC2 5300) speed matches legacy platform specs
  • CAS latency CL5 keeps timing tight for reliable throughput
  • 240-pin DDR2 form factor with heat spreader aids cooling

Tekniset tiedot

BrandKingston
ModelKVR667D2D8F5/1GI
Capacity1GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCYes
Buffered/RegisteredFully Buffered
Heat SpreaderYes
Lähetyspaino0.07 kg
Pakkauksen mitat171 × 57 × 13 mm

Kysymyksiä tästä tuotteesta

Does the 240-pin DDR2 module fit a standard FB-DIMM slot?

Yes, the 240-pin DDR2 SDRAM form factor matches the FB-DIMM slot used for fully buffered memory.

What is the correct orientation step when installing this ECC fully buffered stick?

Align the notch on the 240-pin edge connector with the key in the FB-DIMM slot, then press firmly until the retention clips click shut.

Will the attached heat spreader need any maintenance or replacement over time?

The integrated heat spreader is a passive component with no moving parts and requires no scheduled maintenance or replacement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.