Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2D8F5/2G 2GB DDR2 667 ECC Fully Buffered server RAM

SKU CH-2C61-40NKC MPN KVR667D2D8F5/2G

2GB DDR2 667 ECC fully buffered server module with CL5 latency, 1.80V operation and a heat spreader

  • Capacity2GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCYes
  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on heavily loaded channels
  • 2 GB capacity extends memory headroom for legacy systems
  • DDR2 667 speed matches PC2 5300 platform requirements
  • Heat spreader aids thermal management during sustained operation

Capacity and Server Fit

This 2 GB DDR2 module targets administrators maintaining legacy servers that require fully buffered ECC memory. The dual-rank design delivers registered error correction for data integrity in multi-socket platforms. It is not suited for desktop boards that lack chipset support for fully buffered DIMMs or for systems needing higher density per slot.

Thermals and Power Draw

Operating at 1.80 V with an integrated heat spreader, the module runs cool under typical server workloads. The registered buffer adds minimal latency while stabilising the memory bus across multiple ranks. No active cooling is required beyond standard chassis airflow. Acoustic impact is negligible in rack environments.

Accessories and Software Impact

The heat spreader is the only bundled hardware; it improves thermal headroom without altering slot clearance. No configuration utilities, firmware tools or diagnostic software accompany the kit. Installation is limited to seating the 240-pin DIMM and enabling ECC in the system BIOS.

Priekšrocības

  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on heavily loaded channels
  • 2 GB capacity extends memory headroom for legacy systems
  • DDR2 667 speed matches PC2 5300 platform requirements
  • Heat spreader aids thermal management during sustained operation

Specifikācijas

BrandKingston
SeriesValueRAM
ModelKVR667D2D8F5/2G
Capacity2GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCYes
Buffered/RegisteredFully Buffered
Heat SpreaderYes
FeaturesDual Rank
Sūtījuma svars0.07 kg
Sūtījuma izmēri171 × 57 × 13 mm

Jautājumi par šo preci

How do I install this 240-pin DDR2 module and what step do people often miss?

Align the notch on the gold edge with the key in the slot, press firmly until both retaining clips click shut, and verify the system detects the full 2 GB at 667 MHz; the step often missed is seating the module evenly so both clips engage simultaneously.

What maintenance or replacement will this fully buffered ECC module need later?

No routine maintenance is required; if a memory test eventually reports uncorrectable errors the module must be replaced because DDR2 components are no longer produced.

What limit appears first under sustained load on this CL5 1.80 V kit?

The DDR2 667 bandwidth ceiling is reached before thermal throttling, so throughput plateaus at the rated 5300 MT/s transfer rate during prolonged workloads.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.